The SRU-UPS is a power backup unit, housed on a 100x160mm2 Eurocard, suitable e.g. for CompactPCI® Serial backplanes or other 19-inch based systems. Intended for use in addition (in-line) to a PSU, it can be regarded as uninterruptible power supply (UPS).
The SRU-UPS can pass through up to 60W (12V/5A) from its power input to the CPU board and peripheral cards, reasonable for small to medium systems. When a power fail situation occurs, the SRU-UPS sustains full power on its output for >10s, sufficient for a normal shutdown of the operating system without loss of data.
The SRU-UPS is also a backup solution for short power failures. During normal operation, the input voltage is forwarded to the SRU-UPS output with a small loss of <0.3V. When the UPS detects an under-voltage condition (<11.5V) on its power input, output power will be generated by a DC/DC converter instead, derived from an array of on-board ultra capacitors.
The SRU-UPS is equipped with a PwrBlade® backplane connector. EKF offers suitable CompactPCI® Serial backplanes with two adjacent PwrBlade® slots for both a removable power supply and the SRU-UPS card.
Features
- Single size Eurocard 3U 100x160mm2
- Front panel width 8HP
- PwrBlade® backplane connector (+12V input, +12V output)
- Recommended backplane position adjacent to the power supply
- Non-standard dual power slot backplane required (in-line operation)
- Custom CompactPCI® Serial backplanes available
For UPS specifications please refer to the datasheet
Special Features
- FCI/Amphenol PwrBlade® backplane header, 9x power 24x signal contacts
- Pin assignment similar to nVent and Trenew removable power supplies (AC contacts = NC)
- COTS CompactPCI® Serial backplane available with two adjacent (8HP pitch) PwrBlade® slots for removable power supply and and SRU-UPS (EKF part no. 932.8.04.998)
- Backplane usage is scalable - if an UPS is not required power supply can be moved into UPS slot
- Custom backplane solutions CompactPCI® Serial or other Eurocard based available on request
- Front handle micro-switch can be used as system power button replacement
Applications
- Short time backup solution e.g. bridging the time gap from general power failure to emergency generator startup
- Can be used to backup the system until normal shutdown of the operating system has been accomplished (shutdown initiated by power fail output signal from PSU or UPS)
- System reliability enhancement for critical mains supply
Environment, Regulatory
- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution (coating, sealing, underfilling on request)
- RoHS compliant
- Operation temperature -20...+70°C (industrial temperature range)
- Storage temperature -20...+70°C
- Humidity 5%...95% RH non condensing
- Altitude -300m...+3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 230.6 years (carrier board, w/o mezzanine card)
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
For ordering options please contact systerra computer GmbH
|