Low Profile Mezzanine for CompactPCI® Serial CPU Cards: M.2 NVMe SSD Storage, USB Type-C Front I/O
|
Available as a mezzanine add-on expansion board e.g. to the SC4-CONCERTO and successor CPU carrier cards, the main purpose of the S20-NVME is to provide a mass storage solution, by means of an NVMe (PCIe x4) M.2 SSD module. M.2 (formerly NGFF) has been established as a standard by the PCI-SIG® and is very popular for industrial applications (IoT).
The S20-NVME accommodates an M.2 module with key ID M (PCIe x4), up to 22x80mm2 (2280). NVMe SSD modules are available from several manufacturers, with a maximum capacity of 2TB as of current.
In addition, a front panel Type-C receptacle is provided on the S20-NVME, for use as USB 3.1 Gen 1 (5Gbps) host port (DFP). Dual screw locking Type-C cable connectors are supported. External devices attached can be sourced via VBUS up to 3A/5V.
The S20-NVME connects to the mezzanine expansion connector HSE1 of the CompactPCI® Serial CPU carrier board, maintaining the 4HP (20.32mm) total assembly height (low profile mezzanine module). The S20-NVME can be used together with an additional side card (8HP in total) attached to the CPU HSE2 connector.
Form Factor
- Proprietary size mezzanine module 84.3mm x 95mm
- Fits basically into the 4HP (20.3mm) envelope of the CPU carrier board
- Typically delivered as a ready to use assembly unit (including SC4-CONCERTO or successor CPU card)
- Mounting position right (on top of a CPU board or CPU side card)
Host I/F Connectors HSE1
- High speed mezzanine connectors
- Suitable for PCI Express® Gen3, USB 3.0 SuperSpeed
- Bottom mount male connector HSE1 (high speed expansion)
- Mating with the carrier card female connector HSE1
- Board-to-board height 10.0mm for a 4HP assembly
- Cutout around carrier card connector HSE2 - allows additional side card use (8HP front panel width in total)
- PCI Express® x4 support, dedicated to the NVMe SSD module M.2 socket
- 1 x USB 3.1 Gen1 5Gbps support, dedicated to the Type-C USB front panel I/O connector)
- Power sourcing 12V/1.5 A maximum continuous current (2 pins)
M.2 Module Connector
- M.2 socket key Id M, for 1 x NVMe (PCIe x4) SSD, M.2 size up to 2280
- Power switch for M.2 module undervoltage lockout, short-circuit protection, quick discharge
- M.2 NVME SSD module socket, key Id M, PCIe x4 I/F
- PCIe x4 sourced via HSE1 mezzanine connector
- Maximum (theoretical) 32Gbps I/O data transfer rate (Gen3 PCIe 8GT/s)
Type-C Front Panel Connector
- Type-C front panel receptacle
- Suitable for Type-C compliant USB cable assemblies
- Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'
- VBUS over voltage, surge, and ESD protection
- Host mode USB 3.1 Gen 1 (5Gbps SuperSpeed), passed through from HSE1 mezzanine connector (CPU carrier card USB host controller e.g. PCH)
- Downstream Facing Port (DFP) controller and power switch, up to 5V/3A VBUS
- 10Gbps MUX for Type-C flip control (signal flow according to the cable plug orientation)
- USB 3.1 Gen 2 ready (10Gbps SuperSpeed+) for future CPU chipset generation
Environmental & Regulatory
- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution
- Coating, sealing, underfilling on request
- Lifetime application support
- RoHS compliant
- Operation temperature 0...+85°C
- Operation temperature -40...+85°C (industrial temperature range) on request
- Storage temperature -40...85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 141.8 years
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
Applications
- Low profile mezzanine module for EKF CPU Cards (SC4-CONCERTO, SC5-FESTIVAL and successional)
- 4HP assembly CPU carrier board and S20-NVME mezzanine card
- M.2 based mass storage, M.2 PCIe x4 socket (NVMe)
- Optional front panel I/O (2 x Type-C, dual screw locking)
- Front panel I/O connector Type-C, dual screw locking, USB 3.1 Gen 1
Ordering Options
Manuf. Part No | | Part Description |
S20-0100-NVME | | Mezzanine module, stack height 9.5mm (low profile), M.2 PCIe x4 (NVMe), add-on for HSE1 mezzanine connector based CPU |
S20-0200-NVME | | Mezzanine module, stack height 9.5mm (low profile), M.2 PCIe x4 (NVMe), 1x Type-C USB 3 Port add-on for HSE1 mezzanine connector based CPU |
|
|