|
The conversion of RS-232 into RS-422 / RS-485 features interference-free serial data transfer over long distance.
Even higher noise immunity and very long ranges can be achieved by conversion to fiber optics.
For Ethernet are also twisted pair to fiber converters available archieving ranges of 4...40 km featuring galvanic isolation and highest noise immunity and as well as perfect lightning protection.
Durch die Umsetzung von RS-232 Schnittstellen auf RS-422 / RS-485 Pegel lassen sich serielle Daten störsicher über große Entfernungen Übertragen. Noch höhere Störsicherheit und sehr große Reichweiten sind durch Umsetzung auf Lichtwellenleiter erzielbar.
Für Ethernet sind ebenfalls Twisted-Pair-zu-LWL Konverter verfügbar, die Verbindungsdistanzen zwischen 4 und 40 km ermöglichen und neben galvanischer Trennung auch auch perfekte Störfestigkeit sowie Blitzschutz bieten.
|
Auswahl Media Converter
|
|
|
Fiber optical Relais for high-redundant Backbones
|
|
Rack Mount modular serial and Ethernet Media Converters
|
|
RS-232 to RS-422/485 Media Converters, Isolators, and Repeaters
|
|
RS-232, RS-422, RS-485 to optical Fiber Media Converters
|
|
|
Fast and Gigabit Ethernet Copper to Fiber Media Converters
|
|
10, 100, and 1000 Mbit/s Fiber Optic to Copper Mediaconverters with integrated Switch
|
|
Embedded Copper to Fiber Converter Modules
|
|
Feldbus zu LWL Konverter
|
|
|
10/100 Mbit/s Ethernet über 75 Ohm Videokabel übertragen
|
|
Broschüren, Whitepapers und Spezifikationen zu Media Converter
|
|
Fiber Optical Bypass Units
|
|
| |
|
Moxa
|
|
2-Channel fiber optical bypass Relais
The OBU-102 fiber optical bypass units add bypass relay functionality to any network node. In linear topologies, a single power outage or node failure can take out an entire chunk of the network, because communications to all the network nodes further down the line are also cut ... more
|
|
 |
|
Rack Mount modular serial and Ethernet Media Converters
|
|
| |
|
Moxa
|
|
10/100BaseT(X) to 100BaseFX slide-in modules for the NRack System
The CSM-200 modules are slide-in Ethernet-to-fiber media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (SC/ST connectors), and can be installed in any NRack System™ chassis... more
|
|
|
Moxa
|
|
NEW - 10/100BaseT(X) to 100BaseFX slide-in modules for the NRack System
The CSM-400 modules are slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis... more
|
|
|
Moxa
|
|
RS-232/422/485 to Fiber slide-in Modules for the NRack System
The Moxa TCF-142-RM series of serial-to-fiber converters are slide-in modules that work with the TRC-190 chassis. The modules convert from the RS-232, RS-422, or RS-485 signal to a fiber optic signal ... more
|
|
|
Moxa
|
|
19-Slot Chassis for NRack modular Media Converter System
The TRC-190 series provides 19 slots for media converter modules from the CSM-200 series of Ethernet-to-fiber modules and TCF- 142-RM series of serial-to-fiber modules. A TRC-190 chassis comes with one AC or DC power input, with an optional redundant power expansion module available for greater reliability... more
|
|
|
Moxa
|
|
NEW - 19 inch 18-Slot Rackmount Chassis for the NRack System
The TRC-2190 series provides 18 slots for media converter modules from the CSM-400 series of Ethernet-to-fiber management modules. It also supports SNMP/web console for remote management and monitoring... more
|
|
|
|
Serial Media Converter
|
|
| The Serial Media Converters provides full electrical isolation for bi-directional serial communication between two RS-232 devices in a compact, industrial grade package. The built-in, wide range isolators are tested to ensure that they can withstand more than 4 KV rms input to output for 1 minute. This means that the Serial Converters not only meets the requirements of general serial data communications, but also the high standards required by industrial automation and medical applications.
|
|
Moxa
|
|
Industrial RS-232 to RS-422/485 converters with 2 KV isolation
The TCC-100 and TCC-100I are RS-232 to RS-422/485 converters that increase networking capability by extending the RS-232 transmission distance ... more
|
|
|
Moxa
|
|
Industrial RS-422/485 converter/repeater with 2 KV isolation protection
The TCC-120 and TCC-120I are RS-422/485 converters/repeaters designed to extend RS-422/485 transmission distance ... more
|
|
|
Moxa
|
|
Port-powered RS-232 to RS-422/485 with optional 2.5 KV isolation
The TCC-80/80I provides complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. It supports both half duplex 2-wire RS-485 and full duplex 4-wire RS-422/485 ... more
|
|
|
Moxa
|
|
Port-powered RS-232 4-Channel Isolator
The TCC-82 provides full electrical isolation for bi-directional serial communication between two RS-232 devices in a compact, industrial grade package ... more
|
|
|
Moxa
|
|
Entry-Level RS-232 to RS-422/485 Converters
The Transio A52 and A53 are smart RS-232 to RS-422/485 bi-directional converters ... more
|
|
|
Moxa
|
|
Industrial RS-232/422/485 to fiber converters
The ICF-1150 series supports 2 serial ports, with a D-sub connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication ... more
|
|
|
|
Serial to Fiber Converter
|
|
| The Fiber Converters are compact media converter that transmit RS-232 signals over optical fiber. Power is derived from either the serial port or an external power source. A pair of Fiber Converters converters can be used to connect two RS-232 devices with optical fiber in full duplex mode.
|
| Moxa |
|
Serial-to-Fiber Guide |
Serial-to-Fiber Converter Selection Guide
Technical comparison sheet of Moxa TCF and ICF series serial to fiber converters. more |
|
|
Moxa
|
|
Industrial RS-232/422/485 to fiber converters
The ICF-1150 series supports 2 serial ports, with a D-sub connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication ... more
|
|
|
Moxa
|
|
1-Channel Industrial CANbus-to-Fiber Converter
The ICF-1170I series CANbus-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 KV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online ... more
|
|
|
Moxa
|
|
Port-powered RS-232 to Optical-Fiber Media Converters
The TCF-90 is a compact media converter that transmits RS-232 signals over optical fiber. Power is derived from either the serial port or an external power source ... more
|
|
|
Moxa
|
|
RS-232/422/485 to optical fiber media converters
The TCF-142 media converter is equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber ... more
|
|
|
Moxa
|
|
RS-232/422/485 to Fiber slide-in Modules for the NRack System
The Moxa TCF-142-RM series of serial-to-fiber converters are slide-in modules that work with the TRC-190 chassis. The modules convert from the RS-232, RS-422, or RS-485 signal to a fiber optic signal ... more
|
|
|
Moxa
|
|
2-Port industrial PROFIBUS-to-Fiber Converter with Ring-Redundancy
The ICF-1280I series industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km (single-mode fiber). The ICF-1280I provides 2 kV isolation protection for the PROFIBUS system and dual power inputs to ensure that your PROFIBUS device will perform uninterrupted ... more
|
|
|
Moxa
|
|
Industrial PROFIBUS-to-Fiber Converter
The ICF-1180I series industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km ... more
|
|
|
|
Ethernet Twisted Pair-to-Fiber Converter
|
|
| |
|
100 Mbit Fiber-to-Copper Media Converters
|
|
| |
|
Moxa
|
|
10/100BaseT(X) to 100BaseFX slide-in modules for the NRack System
The CSM-200 modules are slide-in Ethernet-to-fiber media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (SC/ST connectors), and can be installed in any NRack System™ chassis... more
|
|
|
Moxa
|
|
Entry-level industrial 10/100BaseT(X) to 100BaseFX media converters
The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments ... more
|
|
|
Moxa
|
|
Entry-level industrial 10/100BaseTX to 100BaseFX Media Converter
The Moxa IMC-21 industrial media converters are entry-level 10/100BaseTX to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments ... more
|
|
|
Moxa
|
|
Industrial 10/100BaseTX to 100BaseFX Media Converters
The Moxa IMC-101 industrial media converters provide industrial grade media conversion between 10/100BaseTX and 100BaseFX (SC/ST connectors) ... more
|
|
|
Moxa
|
|
IEEE 802.3af PoE Ethernet-to-Fiber Media Converters
The Moxa IMC-P101 series Ethernet-to-fiber media converters provide Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors) ... more
|
|
|
Moxa
|
|
Entry-level industrial gigabit Ethernet-to-fiber media converters
The IMC-21GA industrial media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to 100/1000Base- SX/LX or selected 100/1000Base SFP module media conversion in harsh industrial environments ... more
|
|
|
Moxa
|
|
IEC 61850-3 and EN50155 Ethernet-to-Fiber Media Converters
The PTC-101 Ethernet-to-fiber media converters convert from 10/100BaseT(X) to 100BaseFX. Models are available with either SC, ST, or LC connectors ... more
|
|
|
Moxa
|
|
IEC 61850-3 and EN50155 Ethernet-to-Fiber Media Converters
The PTC-101-M12 EN 50121-4 Ethernet-to-fiber media converters convert from 10/100BaseT(X) to 100BaseFX. The models are available with SC/ST connectors in fiber and M12 connector in Ethernet to provide a reliable communication... more
|
|
|
Gigabit Ethernet Fiber to Copper Converters
|
|
| |
|
Moxa
|
|
NEW - 10/100BaseT(X) to 100BaseFX slide-in modules for the NRack System
The CSM-400 modules are slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis... more
|
|
|
Moxa
|
|
Industrial Gigabit Ethernet to fiber media converter
The IMC-101G industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseTX to 1000BaseSX/LX/LHX/ZX media conversion (via SFP Module) in harsh industrial environments ... more
|
|
|
Accessories
|
|
| |
|
GarrettCom
|
|
Rack-Mount Tray for Media Converters
MC14-TRAY, rack-mounting for up to 16 Magnum 14-Series Media Converters. The rear space of the rack holds power strips/power supplies ... more
|
|
|
|
Ethernet Converter Switches
|
|
| |
|
GarrettCom
|
|
10 Mb Fiber to 10/100BaseTX Converter Switch
For any user who needs a 10 Mb fiber link connected to one or two 10/100
copper devices, the “go anywhere” Magnum™ CSN14 Converter Switch™ is
a versatile and handy solution ... more
|
|
|
GarrettCom
|
|
100BaseFX to 10/100BaseTX Converter Switch
Combine a 100 Mb Fiber Media Converter and a two-port 10/100 copper Switch,
and you have the Converter Switch, a new flexible edge-of-the-network Ethernet
product. Add in fiber port choices for all multi-mode and single-mode fiber connector types plus AC or DC input power selection and multiple application environments ... more
|
|
|
GarrettCom
|
|
Gigabit Ethernet Media Converter Switch
Combine a Gigabit (Gb) Fiber Media Converter and a two-port 10/100/1000 copper Switch, and you have the Magnum CSG14 Converter Switch™, a new high-speed flexible edge-of-the network industrial Ethernet product ... more
|
|
|
GarrettCom
|
|
Dual Fiber + Copper Fast/Gigabit Converter Switch
The GarrettCom CSG14U can convert any Gb fiber type – multi-mode and
single-mode – and fiber media distance with a selection of Fast and Gigabit SFP fiber transceivers, up to two of which can be plugged in ... more
|
|
|
|
Embedded Media Converters
|
|
Embedded Ethernet Medienkonverter ermöglichen eine einfache Umsetzung von Kupfer auf Glasfaser Leitungen und können direkt in kundenspezifische Geräte/OEM-Systemlösungen integriert werden.
Die Module sind Ethernet Medienkonverter, die Signale von paarweise verdrillten 10/100/1000BASE-TX Netzwerkkabeln auf 100BASE-FX oder 1000BASE-X Glasfaserkabel umwandeln. Gleichzeitig kann die maximale Länge der Netzwerkverbindung von 100 Meter bei Kupferleitungen auf über 10 Kilometern bei Verwendung von Single-Mode Glasfaser Kabeln erhöht werden.
|
|
MPL
|
|
Standalone Ethernet Copper to Fiber Optic Media Converter with Jumbo Frames Support
The TX2FX is an Ethernet media converter that translates transmission signals from a twistedpair 10/100/1000Base-TX cable to a 100Base-FX or 1000Base-X fiber optic cable. It expands network data transmission distances beyond the 100 meter limitation of copper wire to over 10 kilometers by using single-mode fiber optic cable... more
|
|
|
MPL
|
|
Standalone Ethernet Copper to Fiber Optic Media Converter with Jumbo Frames Support
The TX2FX-11 is a Ethernet media converter module which translates transmission signals from a twisted-pair 10/100/1000BASE-TX to a 100/1000BASE-X fiber optic cable. RJ45-Port and SFP-Slot are on the same side ... more
|
|
|
MPL
|
|
Standalone Ethernet Copper to Fiber Optic Media Converter with Jumbo Frames Support
The TX2FX-12 is a Ethernet media converter module which translates transmission signals from a twisted-pair 10/100/1000BASE-TX to a 100/1000BASE-X fiber optic cable. RJ45-Port and SFP-Slot are on the opposite side ... more
|
|
|
MPL
|
|
Standalone Ethernet Media Converter module with two RJ45 and one SFP Port and Jumbo Frames Support
The TX2FX-13 comes with an auxiliary 100 Mbit/s copper Ethernet port. This makes the TX2FX-13 to a very compact unmanaged switch with one SFP slot, one triple speed copper port, and one 10/100 MBit/s copper port ... more
|
|
|
MPL
|
|
Standalone Ethernet Media Converter module with 2 copper (RJ45 / 2mm header) and SFP
The TX2FX-14 comes with 2 copper (RJ45 / 2mm header) and SFP. This makes the TX2FX-14 a very compact unmanaged switch with one SFP slot, and two triple speed copper ports... more
|
|
|
|
Feldbus zu LWL Konverter
|
|
| |
|
Moxa
|
|
1-Channel Industrial CANbus-to-Fiber Converter
The ICF-1170I series CANbus-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 KV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online ... more
|
|
|
Moxa
|
|
Industrial PROFIBUS-to-Fiber Converter
The ICF-1180I series industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km ... more
|
|
|
Moxa
|
|
2-Port industrial PROFIBUS-to-Fiber Converter with Ring-Redundancy
The ICF-1280I series industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km (single-mode fiber). The ICF-1280I provides 2 kV isolation protection for the PROFIBUS system and dual power inputs to ensure that your PROFIBUS device will perform uninterrupted ... more
|
|
|
|
Ethernet-over-Coax Extender
|
|
| |
|
|
|
Ethernet-over-Koax Extender-Kit mit RJ45 Anschluss
Mit dem IB-CX110-110-Kit kann ein vorhandenes 75 Ohm Koaxialkabel (max. 200 m) zur Übertragung von 100 Mbit/s Ethernet genutzt werden. Das Kit enthält zwei Adapter die jeweils 100BaseTX (RJ45) auf 75 Ohm Koax (BNC) umsetzen. more
|
|
|
|
|
(1167)
|
|
(623)
|
|
(104)
|
|
(528)
|
|
(613)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(123)
|
|
