Available as a mezzanine add-on expansion board to the CCM-BOOGIE, PC1-GROOVE and other CPU carrier cards, the main purpose of the C47-MSATA is to provide dual host connectors for mounting of mSATA SSD modules, as a rugged and fast mass storage media. With both sockets in use, a SATA RAID level 0/1 system can be easily established, for even higher performance and reliability.
MSATA host connectors are mechanically identical to the PCI Express® Mini Card specification. With respect to the signal routing, the C47-SATA allows also for use of USB bound PCI Express® Mini Card modules, as an alternate to mSATA SSDs. Such Mini Card modules which need support for a PCI Express® lane cannot be used with the C47-SATA.
Basically, the C47-MSATA is designed to fit into the 4HP (20.32mm) envelope of a CompactPCI® CPU carrier board, so that another 4HP pitch mezzanine expansion board may be stacked above the CPU/C47 assembly in addition. The C47-MSATA accommodates either full-size (50.8mm length, fixed by latch) or mini-size (26.8mm length, screw lock) mSATA modules.
The C47-MSATA can be optionally equipped with one ore two USB 2.0 type A receptacles. In addition, up to two SATA connectors (latching headers) are optionally available on the C47-MSATA, for attachment of system internal drives. However, both cable connector options would exceed the 4HP total stack height for the CPU carrier board and C47-MSATA assembly.
Features
- Proprietary size mezzanine module 66mm x 95mm
- Fits basically into the 4HP (20.3mm) envelope of the CPU carrier board
- Typically delivered as a ready to use assembly unit
- Mounting position right (on top of CPU board)
- up to 4 x SATA 3G channels (RAID option)
- 4 x USB 2.0 ports
- 1.6 A maximum continuous current via 3.3V rail
- Thermal Conditions
- Operating temperature: -40°C ... +85°C (depends on mSATA modules in use)
- Environmental Conditions
- Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- RoHS compliant
- Coating, Sealing, Underfilling on request
- Long Term Availability
- EC Regulations
- EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- 2002/95/EC (RoHS)
For more specific details, please refer to the attached datasheet
Ordering Options
Manuf. Part No | | Part Description |
C47-1-MSATA | | Add-on module, dual MSATA SSD sockets, additional USB connector, additional SATA connector, for CCM-BOOGIE, PC1-GROOVE, PC2-LIMBO, or similar |
C47-2-MSATA | | Add-on module (low profile), dual MSATA SSD sockets, for current EKF CPU Boards |
|