The PC4-PRESTO is a rich featured high performance 4HP/3U CompactPCI® PlusIO CPU board, equipped with a 4th Generation Intel® Core™ mobile processor (Haswell dual- or quad-core). The PC4-PRESTO front panel is provided with two Gigabit Ethernet jacks, two USB 3.0 receptacles, and two Mini DisplayPort connectors, compliant with the DisplayPort 1.2 standard for Multi-Stream-Transport (MST). Local expansion mezzanine boards (side cards) are available for additional front panel and/or rear I/O, resulting in an 8HP front panel width assembly unit.
The PC4-PRESTO is equipped with up to 16GB RAM with ECC support. 8GB memory-down are provided for rugged applications, and another 8GB are available via the DDR3 ECC SO-DIMM socket. Low profile SSD mezzanine modules are available as on-board mass storage solution, maintaining the 4HP front panel width. The PC4-PRESTO backplane connectors comply with the PICMG® CompactPCI® PlusIO system slot specification, via J2 suitable for a rear I/O module or hybrid CompactPCI® Serial system. The PC4-PRESTO is backwards compatible to classic CompactPCI® systems.
The PC4-PRESTO is equipped with a set of local expansion interface connectors, which can be optionally used to attach a mezzanine side board. A variety of expansion cards is available, e.g. providing legacy I/O and additional PCI Express® based I/O controllers such as SATA, USB 3.0 and Gigabit Ethernet, or a third video output. Most mezzanine side cards can accommodate in addition a 2.5-inch drive.
Typically, the PC4-PRESTO and the related side card would come as a readily assembled 8HP unit. As an alternate, low profile Flash based mezzanine storage modules are available that fit on the PC4-PRESTO while maintaining the 4HP profile. The C48-M2 module e.g. is equipped with two M.2 (up to 2280 size) SATA Solid State Drives (SSD), suitable for installation of any popular operating system.
Features
- CompactPCI® PlusIO (PICMG® CPCI 2.30) System Slot Controller
- Form factor single size Eurocard (board dimensions 100x160mm2)
- Mounting height 3U
- Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
- Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
- Backplane communication via CompactPCI® J1 and J2 hard metric connectors
- J1 Connector for PICMG® CompactPCI® 32-Bit Support
- J2 Connector (UHM high speed) for CompactPCI® PlusIO support (4 x PCIe Gen2, 4 x SATA 3G/6G*, 4 x USB, 2 x GbE)
- J2 PlusIO configuration allows for either CompactPCI® Serial backplane usage or rear I/O module attachment
- On-board PCIe x 4 Gen2 mezzanine expansion option (side card)
- On-board SATA x 4 6G mezzanine expansion option for mass storage modules or side cards
- On-board DisplayPort (3rd video output) mezzanine expansion option for side cards
- Side cards and low profile mass storage modules available as COTS and also as custom specific
Processor Options
- 4th Generation Intel® Core™ CPU (Haswell H)
- i7-4700EQ Processor 2.4/1.7GHz (TB 3.4GHz) • 47W/37W TDP • Quad-Core • GT2-4600 Graphics 1000MHz • vPRO™/AMT
- i5-4400E Processor 2.7GHz (TB 3.3GHz) • 37W TDP • Dual-Core • GT2-4600 Graphics 1000MHz • vPRO™/AMT
- i5-4410E Processor 2.9GHz • 37W TDP • Dual-Core • GT2-4600 Graphics 1000MHz • vPRO™/AMT
- i5-4422E Processor 1.8GHz (TB 2.9GHz) • 25W TDP • Dual-Core • GT2-4600 Graphics 900MHz • vPRO™/AMT
- i3-4110E Processor 2.6GHz • 37W TDP • Dual-Core • GT2-4600 Graphics 900MHz
- i3-4112E Processor 1.8GHz • 25W TDP • Dual-Core • GT2-4600 Graphics 900MHz
- Celeron 2000E Processor 2.2GHz • 37W TDP • Dual-Core • HD Graphics 900MHz
- Celeron 2002E Processor 1.5GHz • 25W TDP • Dual-Core • HD Graphics 900MHz
Main Memory
- Integrated memory controller up to 16GB DDR3L 1600 +ECC
- DDR3L +ECC soldered memory up to 8GB
- DDR3L +ECC SO-DIMM memory module socket up to 8GB
Please refer to the attached datasheet for more information
Ordering Options
| Manuf. Part No | | Part Description |
| PC4-280D-PRESTO | | 3U/4HP, Core(TM) i5-4422E 1.8GHz DC 25W TDP, 3MB LLC; PCH QM87, 8GB on-board DDR3L+ECC, 2xmDP, 2xUSB3, 2xGbE; Local Exp.: 6xUSB, 2xSATA6G, 1xSATA3G, 4xPCIe, 1xDP; PICMG 2.30 PlusIO: 4xUSB2, 4xSATA3G, 4xPCIe, 2xGbE |
| PC4-286D-PRESTO | | 3U/4HP, Core(TM) i5-4422E 1.8GHz DC 25W TDP, 3MB LLC; PCH QM87, 8GB on-board DDR3L+ECC, 2xmDP, 2xUSB3, 2xGbE; Local Exp.: 6xUSB, 2xSATA6G, 1xSATA3G, 4xPCIe, 1xDP; cPCI64 compatible |
| PC4-480D-PRESTO | | 3U/4HP, Core(TM) i5-4400E 2.7GHz DC 37W TDP, 3MB LLC; PCH QM87, 8GB on-board DDR3L+ECC, 2xmDP, 2xUSB3, 2xGbE; Local Exp.: 6xUSB, 2xSATA6G, 1xSATA3G, 4xPCIe, 1xDP; PICMG 2.30 PlusIO: 4xUSB2, 4xSATA3G, 4xPCIe, 2xGbE |
Local Expansion and Mass Storage Solutions: Mezzanine side card connectors for optional local expansion
| Manuf. Part No | | Part Description |
| P-EXP | | 2 x USB 2.0 & Legacy (from PCH) |
| P-DP3 | | 3rd DisplayPort video (from Intel® Core™ CPU) |
| P-HSE | | 4 x SATA 6G & 4 x USB 2.0 (from PCH) |
| P-PCIE | | PCIe Gen2 5GT/s 1 link x 4 lanes or 4 links x 1 lane (from on-board PCIe® switch) |
Local Expansion and Mass Storage Solutions: Low profile mezzanine module options (to be ordered separately)
| Manuf. Part No | | Part Description4HP |
| C41-CFAST | | mezzanine module for CFast™ Card |
| C42-SATA | | mezzanine module for SATA 1.8-Inch Solid State Drive |
| C47-MSATA | | mezzanine module for Dual mSATA SSD |
| C48-M2 | | mezzanine module for Dual M.2/NGFF SATA SSD 2230 - 2280 size |
Local Expansion and Mass Storage Solutions: 8HP/12HP Mezzanine side card options (to be ordered separately)
| Manuf. Part No | | Part Description4HP |
| PCL-CAPELLA | | multi function side card |
| PCS-BALLET | | multi function side card |
| SCS-TRUMPET | | multi function side card |
| C32-FIO | | 2 x COM RS-232, USB, PS/2 (12HP assembly) |
Please contact systerra for more expansion options
|
