Available as a mezzanine add-on expansion board (aka side board) to the PC6-TANGO and successor low power CompactPCI® PlusIO CPU carrier cards, the PCU-UPTEMPO provides additional I/O functions available via front panel connectors. Some interfaces are also available as an option via rear I/O. The PCU-UPTEMPO can be equipped with two M.2 style SATA 6G SSD modules, up to the 22110 format, for rugged mass storage needs.
The PCU-UPTEMPO front panel accommodates two RS-232 (COM port) D-Sub connectors, and one ore two USB 2.0 receptacles. As an option, two 3.5mm analog audio jacks (input and output) are available. The CPU carrier board and the PCU-UPTEMPO side card come as an ready to use assembly unit, sharing a common 8HP width front panel. With a 12HP front, another two RS-232 connectors can be provided.
Features
- Mixed function mezzanine side card for CompactPCI® PlusIO CPU boards
- Provides additional front panel I/O, on-board M.2 based SATA SSD mass storage, and optional rear I/O capabilities across the J2 backplane connector
- Suitable for use with the EKF PC6-TANGO low power CPU board
- 8HP assembly together with CPU card
- 12HP assembly in total with CPU card and C32-FIO mezzanine
Front Panel I/O
- Dual RS-232 connectors male DSUB-9 (COM port pin assignment, MAX3243 transceivers)
- Option dual USB 2.0 connectors, electronic power switches 1.5A
- Option single USB 2.0 connector and 2 x analog audio F/P jacks 3.5mm in/out
- Option C32-FIO mezzanine for additional front panel I/O (2 x RS-232, PS/2 KB/MS)
- Integrated 8HP front panel for CPU carrier card and PCU-UPTEMPO
- Integrated 12HP front panel when C32-FIO 3rd floor mezzanine is installed in addition
Mass Storage
- Dual M.2 sockets (formerly known as NGFF), B-coded, SATA 3.0 6G speed, classic AHCI protocol, suitable for installation of any popular operating system
- Lower on-board M.2 socket suitable for an SATA 6G based SSD M.2 module up to 22110 size, wired to the HSE mezzanine connector SATA port 1, derived directly from the PC6-TANGO carrier card Intel® APL-I SoC, Intel® driver support
- Upper on-board M.2 socket suitable for an SATA 6G based SSD M.2 module up to 2280 size, wired to the HSE mezzanine connector SATA port 2,
- derived from the PC6-TANGO on-board Marvell® 9170 PCIe to SATA controller (may not be populated on all PC6-TANGO SKUs)
On-Board Functions
- SIO (Super I/O Controller) SCH3114 attached to the LPC interface (4 x UART, PS/2, GPIO)
- HD-Audio Codec ALC262 (option)
Rear I/O Option
- Rear I/O is optional - available on customers request
- Rear I/O connector J2 as defined by the CompactPCI® specification
- Legacy interface rear I/O option KB/MS, up to 4 x UART, GPIO
Environmental & Regulatory
- Long Term Availability
- Coating, Sealing, Underfilling on request
- RoHS compliant 2002/95/EC
- Operating temperature: 0...+70°C (industrial temperature range on request)
- Storage temperature: -40...+85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
Please refer to the attached datasheet for more information
Ordering Options
| Manuf. Part No | | Part Description |
| PCU-0100-UPTEMPO | | Mezzanine expansion board for PC6-TANGO front panel I/O: 2xRS323, 2xUSB on-board: 2xM.2 SATA |
Please contact systerra computer GmbH for more options
|
