The PC7-FESTIVAL is a rich featured high performance 4HP/3U CompactPCI® PlusIO CPU board, equipped with an Intel® Xeon® E3 familiy mobile workstation processor for demanding applications. For scalability, the PC7-FESTIVAL is also available with a 7th Generation Intel® Core™ processor.
The PC7-FESTIVAL front panel is provided with two RJ45 Gigabit Ethernet jacks, two USB 3.0 Type-A receptacles, and two DisplayPort™ connectors. In addition, up to two USB Type-C front panel receptacles are available as an option, one of them usable alternatively as (third) DisplayPort.
The powerful Xeon® E3-1500 v6 series processor is accompanied by the CM238 mobile PCH, for a maximum of high speed I/O resources (e.g. PCI Express®, SATA, USB).
On-board mass-storage solutions are based on low profile mezzanine expansion cards, which can accommodate up to two M.2 style SSD modules (PCIe® Gen3 x4 and/or SATA). Side cards for an 8HP assembly are also available, providing front I/O and M.2 SSDs.
The PC7-FESTIVAL is equipped with up to 32GB DDR4 RAM with ECC support. Up to 16GB memory-down are provided for rugged applications, and another 16GB are available via the DDR4 ECC SO-DIMM socket.
The backplane connector J1 allows for up to seven CompactPCI® Classic peripheral cards in a system. The J2 connector complies with the CompactPCI® PlusIO standard for high speed rear I/O (fourfold PCIe®, SATA and USB2), or usage of a hybrid CompactPCI® Serial backplane.
Features
- CompactPCI® PlusIO (PICMG® CPCI 2.30) System Slot Controller
- Form factor single size Eurocard (board dimensions 100x160mm2)
- Mounting height 3U
- Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
- Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
- Backplane communication via CompactPCI® J1 and J2 hard metric connectors
- J1 Connector for PICMG® CompactPCI® 32-Bit Support
- J2 Connector (UHM high speed) for CompactPCI® PlusIO support (PCIe, SATA, USB, GbE)
- J2 PlusIO configuration allows for either CompactPCI® Serial backplane usage or rear I/O module attachment
- On-board 2 x SATA 6G mezzanine expansion option for mass storage modules or side cards
- Side cards and low profile mass storage modules available as COTS and also as custom specific
Applications
- General industrial computing, for x86 based software
- IIoT applications, edge computing, IIoT
- Medium to high embedded CPU performance
- CompactPCI® Classic and/or CompactPCI® Serial peripheral card expansion
- Stand-Alone Computer (SAC)
Please refer to the attached datasheet for more deatails
Please contact systerra computer GmbH for ordering informations
|
