The SA4-COUNTRY is a peripheral slot board for PICMG® CompactPCI® Serial systems and acts as carrier for a low profile PCI Express® Card. The SA4-COUNTRY is provided with a PCIe x8 connector (option x4, x1) and accommodates a PCIe® card with maximum dimensions of up to 176mm (length) x 68.9mm (height). Covered by a metallic shell, the PCI Express® Card protrudes slightly from the front panel, for optimum board space utilization.
The SA4-COUNTRY is equipped with the backplane connectors P1/P2 for support of up to eight PCI Express® lanes when inserted into a CompactPCI® Serial fat pipe slot. For the x1 or x4 options, only P1 is required. For optimum signal integrity, PCI Express® Gen3 redrivers are provided on-board, and also a clock buffer. As an option, a 50mm axial fan can be mounted at the SA4-COUNTRY bottom side, for a forced air flow under a demanding PCIe® card.
Features
- PICMG® CompactPCI® Serial Standard (CPCI-S.0)
- Single Size Eurocard 3U 8HP 100x160mm2, assembly extension through front panel (metal cap 13.5mm)
- Actual front panel width may vary depending on customers special needs for system integration and the particular PCI Express® Card in use
- Suitable for CompactPCI® Serial peripheral slot (PCI Express® enabled)
- CompactPCI® Serial fat pipe slot PCIe x8 or at least peripheral slot PCIe x4 recommended
- CompactPCI® Serial backplane connectors P1 & P2 for PCI Express® x8
- CompactPCI® Serial backplane connector P1 for PCI Express® x4
PCI Express® Card
- Carrier board for limited size (short profile) PCI Express® Card
- Maximum card dimensions 176.0mm x 68.9mm
- Die cast hood on the SA4-COUNTRY front panel covers PCI Express® card bracket
- Up to 70W power support via PCI Express® card connector (+3.3V/3A, +12V/5.5A)
- PCI Express® Connector x 1 (SA4-0100-COUNTRY)
- PCI Express® Connector x 4 (SA4-0400-COUNTRY)
- PCI Express® Connector x 8 (SA4-0800-COUNTRY)
- PCI Express® Clock Buffer on-Board
- PCI Express® Gen3 redrivers on-board
- Opening in the SA4-COUNTRY PCB for a 50mm Papst axial fan (optional bottom side mounting), for forced rear side airflow under the PCI Express® Card (heat dissipation enhancement)
Applications
- Easy system integration of special functions not yet available as CompactPCI® Serial board
- System integration of proprietary hard- and software
- Integration of 3rd party IP e.g. FPGA based solutions with proprietary software
- Rapid solution for prototyping systems and small to medium volume applications
Compliance Tested
- Bittware • Intel Altera Arria 10 FPGA
- Nallatech • Intel Altera Arria 10 FPGA
- Reflex CES • Intel Altera Arria 10 FPGA
- Projected: Reflex CES • Intel Altera Arria 5 FPGA
Environment & Regulation
- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution (coating/sealing available on request)
- RoHS compliant
- Operation temperature 0...+70°C (commercial temperature range)
- Operating temperature: -40...+85°C (industrial temperature range)
- Storage temperature: -40...+85°C, max. gradient 5°C/min
- Humidity 5%...95% RH non condensing
- Altitude -300m...+3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 75.1 years
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
Please refer to the attached Datasheet for more information
Ordering Options
Manuf. Part No. | | Product Description |
SA4-0800-COUNTRY | | Low profile half height PCI Express card carrier, increased card dimensions, front panel front extension, PCIe Gen 3 x8 connection |
|