The NPort S9450I series 4-port RS-232/422/485 device servers, which come with a built-in full-function managed Ethernet switch, are designed specifically for the harsh environmental conditions found in electrical substations. With both fiber and wire Ethernet ports supported, the combination of device server plus Ethernet switch gives users the ability to easily install, manage, and maintain the NPort S9450I itself, as well as attached serial devices.
Electromagnetic Compatibility for Harsh Substation Environments
The NPort S9000 series supports a high level of surge protection to prevent damage from the types of power surges and EMI one finds in electrical substations and industrial automation applications. Combined with a -40...+85°C operating temperature range and galvanized steel housing, the NPort S9000 is suitable for a wide range of industrial environments. Another plus is the NPort S9000’s dual power supplies, which provide both redundancy, as well as a wide range of voltage inputs. The WV models accept a power 24/48 VDC power input (ranging from 18 to 72 VDC), and the HV modesl accept a power input of 88 to 300 VDC and 85 to 264 VAC.
Power SCADA with IEC 61850 MMS for Easy Maintenance
The current trend in power SCADA applications is to control and monitor both IT devices (switches, routers, etc.) and IEDs (sensors, actuators, etc.) with the MMS protocol. Contrast this with the more traditional management approach of using SNMP for IT devices and MMS for IEDs. In fact, SIs may even need to manage a variety of legacy devices that use proprietary communications protocols. The NPort S9000 device servers are the world’s first device servers to
integrate MMS into an IT-type device designed specifically for power SCADA applications. The NPort S9000 even supports using MMS to monitor serial communications between the S9000 and the legacy devices.
Supports Modbus/DNP3 Protocol Gateway
The NPort S9000 series provides maximum flexibility for integrating industrial Modbus/DNP3 networks of all types and sizes. The NPort S9000 is designed to integrate Modbus TCP, ASCII, and RTU devices in almost any master/slave combination, including simultaneous serial and Ethernet masters. The NPort S9000 device servers also support protocol conversion between DNP3 serial and DNP3 IP. All models are ruggedly constructed and are DIN-rail mountable.
Ring Redundancy at the Device Level
Device-level communication networks for industrial automation are very critical since they are used to control and monitor device processes. The reliability of these communications depends on ring redundancy at the device level, which is designed to provide fast network fault detection and reconfiguration to support the most demanding control applications. The NPort S9000 series integrates a full-function NPort device server with an industrial switch to carry
serial and Ethernet devices at the same time. In addition, the NPort S9000 can also achieve ring redundancy with standard STP/RSTP and Moxa’s proprietary Turbo Ring or Turbo Chain 2 redundancy protocols. This all-in-one design can be used to optimize and simplify your device network and enhance reliability.
Features
- 4-port RS-232/422/485 serial interface
- Supports up to 5 managed Ethernet switch ports (fiber available with some models)
- DNP3 and Modbus protocols supported
- IEC 61850-3, IEEE 1613 compliant (for power substations)
- Ethernet redundancy with Turbo Ring/Chain and RSTP/STP supported
- Real COM/TTY drivers for Windows and Linux
- Supports IEC 61850 MMS protocol
- Security features based on IEC 62443/NERC CIP
- -40...+85°C wide operating temperature
- Standards and Certifications
- EMC: EN 61000-6-2/-6-4
- EMI: CISPR 32, FCC Part 15B Class A
- Environmental Testing: IEC 60068-2-2, IEC 60068-2-14
- Power Substation: IEC 61850-3, IEEE 1613
- Hazardous Locations: UL/cUL Class I Division 2 Groups A/B/C/D
- Safety: EN 61010-2-201, UL 61010-2-201
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6, IEC 60068-2-64
- 5 Years Warranty
Ordering Options
Manuf. Part No | | Part Description | |
NPort S9450I-WV-T | | 4-port RS-232/422/485 rugged device server, 5 10/100M Ethernet ports, 24/48 VDC, -40...+85°C operating temperature |
|
NPort S9450I-HV-T | | 4-port RS-232/422/485 rugged device server, 5 10/100M Ethernet ports, 88-300 VDC or 85-264 VAC, -40...+85°C operating temperature |
|
NPort S9450I-2M-SC-WV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M multi-mode fiber ports with SC connectors, 24/48 VDC, -40...+85°C operating temperature |
|
NPort S9450I-2M-SC-HV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M multi-mode fiber ports with SC connectors, 88-300 VDC or 85-264 VAC, -40...+85°C operating temperature |
|
NPort S9450I-2M-ST-WV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M multi-mode fiber ports with ST connectors, 24/48 VDC, -40...+85°C operating temperature |
|
NPort S9450I-2M-ST-HV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M multi-mode fiber ports with ST connectors, 88-300 VDC or 85-264 VAC, -40...+85°C operating temperature |
|
NPort S9450I-2S-SC-WV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M single-mode fiber ports with SC connectors, 24/48 VDC, -40...+85°C operating temperature |
|
NPort S9450I-2S-SC-HV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M single-mode fiber ports with SC connectors, 88-300 VDC or 85-264 VAC, -40...+85°C operating temperature |
|
NPort S9450I-2S-ST-WV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M single-mode fiber ports with ST connectors, 24/48 VDC, -40...+85°C operating temperature |
|
NPort S9450I-2S-ST-HV-T | | 4-port RS-232/422/485 rugged device server, 3 10/100M Ethernet ports, 2 100M single-mode fiber ports with ST connectors, 88-300 VDC or 85-264 VAC, -40...+85°C operating temperature |
|
Accessories
Manuf. Part Number | | Product Description | |
CBL-F9M9-150 | | DB9 female to DB9 male serial cable, 1.5 m |
|
CBL-F9M9-20 | | DB9 female to DB9 male serial cable, 20 cm |
|
CN20070 | | 10-pin RJ45 to DB9 female serial cable |
|
Mini DB9F-to-TB | | DB9 female to terminal block connector |
|
ADP-RJ458P-DB9F | | DB9 female to RJ45 connector |
|
WK-51-01 | | Wall mounting kit with 2 plates (51.6 x 67 x 2 mm) and 6 screws |
|
|