The NPort S8000 series combines an industrial device server with a full-function managed Ethernet switch with 4 RS-232/422/485 serial ports, allowing you to easily install, manage, and maintain the product. Combining a device server and switch in one product allows you to save space in your cabinet, reduce overall power consumption, and reduce costs, since you will not need to purchase a switch and serial device server separately.
Supports the Full Range of NPort 5000 Series Device Server Functions
The NPort S8000 series supports the complete array of NPort 5000 series device server functions. You can network your existing serial devices by connecting up to 4 serial devices through Ethernet ports, with only basic configuration required. In addition, data transmission between the serial and Ethernet interfaces is bidirectional.
Full-function Managed Ethernet Switch
The NPort® S8000 series has a built-in full-function managed Ethernet switch that supports QoS, IGMP-snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, and IEEE 802.1X, allowing you to handle virtually any kind of application. Ethernet redundancy, which is used to increase the reliability and availability of your industrial Ethernet network, is provided by Moxa's own Turbo Ring® technology (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D).
Features
- 4-Port RS232/422/485 serial device server
- Serial QoS for configuring serial data transmission priority
- Built-in managed Ethernet switch
- S8455I fiber models: 2 fiber Ethernet ports and three Ethernet ports
- S8455I all copper models: five Ethernet ports
- S8458 models: four fiber Ethernet ports and four Ethernet ports
- Ethernet redundancy with Turbo Ring® and Turbo Chain (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D) supported
- QoS, IGMP-snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON supported
- 2 kV isolation for serial signals (isolation models)
- Adjustable pull high/low resistor for RS-485 ports
- Surge protection for serial, Ethernet, and power
- Standards and certifications
- EMC: EN 55032/24
- EMI: CISPR 32, FCC Part 15B Class A
- Safety: EN 60950-1, IEC 60950-1, UL 508, UL 60950-1
- Hazardous Location: Class I Division 2
- Environmental Testing: IEC 60068-2-1, IEC 60068-2-3
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6
- 5 Years Warranty
| Manufacturers Model Name | | 10/100 BaseT(X) Ports RJ45 Connector | | 100 BaseFX Ports Multi-Mode SC Connector | | 100 BaseFX Ports Single-Mode SC Connector | | Operating Temp. | | Input Voltage | |
| NPort S8455I | | 5 | | – | | – | | 0 to 60°C | | 12-48 VDC | |
| NPort S8455I-T | | 5 | | – | | – | | -40 to 75°C | | 12-48 VDC | |
| NPort S8455I-MM-SC | | 3 | | 2 | | – | | 0 to 60°C | | 12-48 VDC | |
| NPort S8455I-MM-SC-T | | 3 | | 2 | | – | | -40 to 75°C | | 12-48 VDC | |
| NPort S8455I-SS-SC | | 3 | | – | | 2 | | 0 to 60°C | | 12-48 VDC | |
| NPort S8455I-SS-SC-T | | 3 | | – | | 2 | | -40 to 75°C | | 12-48 VDC | |
Accessories
| Manuf. Part No | | Part Description | |
| CN20070 | | 10-pin RJ45 to DB9 female serial cable, 1.5 m | |
| CBL-F9M9-150 | | DB9 female to DB9 male serial cable, 1.5 m | |
| CBL-F9M9-20 | | DB9 female to DB9 male serial cable, 20 cm | |
| ADP-RJ458P-DB9F | | DB9 female to RJ45 connector | |
| WK-46 | | Wall-mounting kit, 2 plates, 8 screws, 46.5 x 66.8 x 1 mm | |
| Mini DB9F-to-TB | | DB9 Female to Terminal Block connector | |
Power Options
| Manuf. Part No | | Part Description | |
| CBL-PJTB-10 | | Non-locking barrel plug to bare-wire cable | |
| HDR-60-24 | | 60 W/2.5 A DIN-rail 24 VDC power supply, universal 85 to 264 VAC or 120 to 370 VDC input voltage, -30 to 70°C operating temperature | |
| NDR-120-24 | | 120 W/5.0 A DIN-rail 24 VDC power supply, universal 90 to 264 VAC or 127 to 370 VDC input voltage, -20 to 70°C operating temperature | |
|
