The PMC676RCTX is a Gigabit Ethernet PMC that offers dual 10/100/1000BaseTX Ethernet interfaces. The card is capable of full duplex operation on each of its channel
The Ethernet/PCI/PCI-X interface includes a powerful DMA engine for each port with very deep FIFO buffers (64 Kbyte). This assures continuous, full bandwidth operation with minimum PCI overhead. In addition, card edge PCI systems can be accommodated using a Abaco PMC239 adapter for rapid proto-type and development.
Low Cost, Effective Interconnect
Two PMC676RCTX boards can be directly cabled with a simple Ethernet cable. This configuration creates a full duplex 1000 Mbit dedicated data path - delivering high bandwidth at very low cost. More complex, dedicated interconnects can be created using a hub or switch. Both point-to-point and switched hubs, in full duplex mode, remove many determinism concerns raised with traditional Ethernet solutions. This makes the PMC676RCTX an excellent candidate for high performance interconnects that require real time determinism.
The PMC676RCTX is supported by native drivers for many common operating systems (Microsoft® Windows®, Linux®, LynxOS®). Abaco has software drivers for addtional operating systems (VxWorks® and Solaris®). These drivers have been carefully designed and implemented to fit within the LAN protocol stack of the host operating system. Thus all facilities available from the host OS can be utilized across the PMC676RCTX.
Features
- Packet filtering based on checksum errors
- SNMP and RMON statistic counters
- Hardware TCP checksum offloading
- Support for various address filtering modes:
- 16 exact matches (unicast or multicast)
- 4096-bit hash filter for multicast frames
- Promiscuous unicast and promiscuous multcast transfer modes
- PCI-X 133 MHz, PCI 64/66 MHz
- RJ-45 connectors
- DMA engine
- Dual/single 10/100/1000BaseTX Ethernet
- Jumbo Frame capable
- RoHS Compliant
- Versions supporting wide operating temperature range available
Recommended replacements: XMC477RC or NIC1GFT
Ordering Options
Manuf. Part No | | Part Description |
PMC676RCTX | | Dual port 10/100/1000BaseTX NIC; RoHS |
| | -S may be applied to any model number to indicate Solaris OBP boot option |
| | -CC may be applied to any model number to indicate polyurethane conformal coating |
| | -CCA may be applied to any model number to indicate acrylic conformal coating |
| | -PXE may be applied to any model number to indicate PXE boot option Media Kits |
| | -WT Wide temperature range option |
M-GBI-SES-ARS | | Solaris (versions 7, 8, 9) SPARC |
M-GBI-SEV-ARC | | VxWorks (versions 5.4 - 6.8) PPC |
M-GBI-SEV-ARP | | VxWorks (versions 5.4 - 6.8) x86 |
Minimum Order Quantity: 10
|