The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.
Three-Way Communication
The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.
Rotary Switch for Setting the Pull High/Low Resistor
The RS-485 interface supports multidrop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers, together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.
Features
- 3-way communication: RS-232, RS-422/485 and fiber
- Rotary switch to change the pull high/low resistor value
- Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
- 3-way isolation protection (for I models only)
- -40...+85°C wide temperature models available
- Certifications:
- C1D2, ATEX, and IECEx certified for harsh industrial environments
- EMC: EN 55032/24
- EMI: CISPR 32, FCC Part 15B Class A
- Environmental Testing: IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3
- Safety: EN 60950-1, IEC 60950-1
- Vibration: IEC 60068-2-6
- Hazardous Locations Standard models: UL/cUL Class I Division 2 Groups A/B/C/D
- -IEX models: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2, IECEx
- 5 Years Warranty
Ordering Options
Manuf. Part No | | Part Description | | Fiber | | Plug | |
ICF-1150-M-SC | | RS-232/422/485 to fiber converter, 0...+60°C | | multi-mode | | SC |
|
ICF-1150-M-ST | | RS-232/422/485 to fiber converter, 0...+60°C | | multi-mode | | ST |
|
ICF-1150-S-SC | | RS-232/422/485 to fiber converter, 0...+60°C | | single-mode | | SC |
|
ICF-1150-S-ST | | RS-232/422/485 to fiber converter, 0...+60°C | | single-mode | | ST |
|
ICF-1150-M-SC-T | | RS-232/422/485 to fiber converter, -40...+85°C | | multi-mode | | SC |
|
ICF-1150-M-ST-T | | RS-232/422/485 to fiber converter, -40...+85°C | | multi-mode | | ST |
|
ICF-1150-S-SC-T | | RS-232/422/485 to fiber converter, -40...+85°C | | single-mode | | SC |
|
ICF-1150-S-ST-T | | RS-232/422/485 to fiber converter, -40...+85°C | | single-mode | | ST |
|
Models with 2 kV optical Isolation
Manuf. Part No | | Part Description | | Fiber | | Plug | |
ICF-1150I-M-SC | | RS-232/422/485 to fiber converter, 0...+60°C, 2 KV isolation | | multi-mode | | SC |
|
ICF-1150I-M-ST | | RS-232/422/485 to fiber converter, 0...+60°C, 2 KV isolation | | multi-mode | | ST |
|
ICF-1150I-S-SC | | RS-232/422/485 to fiber converter, 0...+60°C, 2 KV isolation | | single-mode | | SC |
|
ICF-1150I-S-ST | | RS-232/422/485 to fiber converter, 0...+60°C, 2 KV isolation | | single-mode | | ST |
|
ICF-1150I-M-ST-T | | RS-232/422/485 to fiber converter, -40...+85°C, 2 KV isolation | | multi-mode | | SC |
|
ICF-1150I-M-SC-T | | RS-232/422/485 to fiber converter, -40...+85°C, 2 KV isolation | | multi-mode | | ST |
|
ICF-1150I-S-SC-T | | RS-232/422/485 to fiber converter, -40...+85°C, 2 KV isolation | | single-mode | | SC |
|
ICF-1150I-S-ST-T | | RS-232/422/485 to fiber converter, -40...+85°C, 2 KV isolation | | single-mode | | ST |
|
IECEx Models
Manuf. Part No | | Part Description | |
ICF-1150-M-SC-IEX | | Industrial RS-232/422/485 to multimode fiber converter, SC connector, IECEx, 0 to 60°C operating temperature |
|
ICF-1150-M-ST-IEX | | Industrial RS-232/422/485 to multimode fiber converter, ST connector, IECEx, 0 to 60°C operating temperature |
|
ICF-1150-S-SC-IEX | | Industrial RS-232/422/485 to single mode fiber converter, SC connector, IECEx, 0 to 60°C operating temperature |
|
ICF-1150-S-ST-IEX | | Industrial RS-232/422/485 to single mode fiber converter, ST connector, IECEx, 0 to 60°C operating temperature |
|
ICF-1150I-M-SC-IEX | | Industrial RS-232/422/485 to multimode fiber converter, SC connector, 2 kV isolation, IECEx, 0 to 60°C operating temperature |
|
ICF-1150I-M-ST-IEX | | Industrial RS-232/422/485 to multimode fiber converter, ST connector, 2 kV isolation, IECEx, 0 to 60°C operating temperature |
|
ICF-1150I-S-SC-IEX | | Industrial RS-232/422/485 to single mode fiber converter, SC connector, 2 kV isolation, IECEx, 0 to 60°C operating temperature |
|
ICF-1150I-S-ST-IEX | | Industrial RS-232/422/485 to single mode fiber converter, ST connector, 2 kV isolation, IECEx, 0 to 60°C operating temperature |
|
ICF-1150-M-SC-T-IEX | | Industrial RS-232/422/485 to multimode fiber converter, SC connector, IECEx, -40 to 85°C operating temperature |
|
ICF-1150-M-ST-T-IEX | | Industrial RS-232/422/485 to multimode fiber converter, ST connector, IECEx, -40 to 85°C operating temperature |
|
ICF-1150-S-SC-T-IEX | | Industrial RS-232/422/485 to single mode fiber converter, SC connector, IECEx, -40 to 85°C operating temperature |
|
ICF-1150-S-ST-T-IEX | | Industrial RS-232/422/485 to single mode fiber converter, ST connector, IECEx, -40 to 85°C operating temperature |
|
ICF-1150I-M-SC-T-IEX | | Industrial RS-232/422/485 to multimode fiber converter, SC connector, 2 kV isolation, IECEx, -40 to 85°C operating temperature |
|
ICF-1150I-M-ST-T-IEX | | Industrial RS-232/422/485 to multimode fiber converter, ST connector, 2 kV isolation, IECEx, -40 to 85°C operating temperature |
|
ICF-1150I-S-SC-T-IEX | | Industrial RS-232/422/485 to single mode fiber converter, SC connector, 2 kV isolation, IECEx, -40 to 85°C operating temperature |
|
ICF-1150I-S-ST-T-IEX | | Industrial RS-232/422/485 to single mode fiber converter, ST connector, 2 kV isolation, IECEx, -40 to 85°C operating temperature |
|
Accessories
Manuf. Part No | | Part Description | |
CBL-F9M9-150 | | DB9 female to DB9 male serial cable, 1.5 m |
|
CBL-F9M9-20 | | DB9 female to DB9 male serial cable, 20 cm |
|
DR-4524 | | 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature |
|
|