SWaP-C Mission Computer with typical aircraft interfaces like 1553, CAN, 12 serial ports and 24 DIOs. The solution is installed in a compact IP67 housing with a total of ten MIL connectors.
The Mission Control Computer is a light weight and compact solution to interface with different bus systems, instruments and measurement systems. To ensure long-term availability (10+ years), the Intel i7 CPUs out of the embedded roadmap are used, as well as other long-term available components.
The design of the CPU board is done such, that all heat generating parts are directly mounted/connected to the compact chromated and powder coated aluminum housing. This concept provides the best passive cooling and avoids the need of sensitive heat pipes. The PIP Family used in mission control computers and servers, is explicitly designed to withstand extreme environment conditions.
The input power of the solution will support the various required MIL-STD.
Input power ranges from 9-36VDC, optionally any other voltage (e.g. 110V aircraft power) can be implemented. For the typical input power variations and interrupts on vehicles & airplanes, a MPL designed a rugged UPS system (BOLERO) can be integrated. The UPS can be operated at -40...+75°C. The complete system is also available for extended temperature without the need of a fan.
Quick Prototype Solution
Technically the same setup can be offered as quick prototype and for feasibility studies, for developing SW without the need of long lead times and costly prototypes. After approval and verification on the desk, the same solution with the same boards can be embedded in an IP67 housing with 38999 connectors, or as open frame version for integration in an existing enclosure or cabinet.
Technical features MILCOTS-38C1 (other options available on request):
- Processor: Intel i7 CPU 3rd. generation, 2 / 4 cores, 2.5 / 3.2 GHz, 6 MB L2 Cache (other CPUs up to 9th gen. possible)
- TPM 1.2 with EAL4.0 support
- Memory: 12GB DDR3 (with other CPU up to 32GB DDR4 memory, with ECC)
- Mass storage: 1x 2.5” SATA (removable)
- Interfaces
- Maintenance: 1x DVI / 3x USB / 1x CAN
- 24x Digital Output
- 24x Digital Input
- LAN: 2x GbE
- Serial Ports: 4x RS422, 4x RS422, 4x isolated RS232, 4x RS232
- Avionics Data Bus: 4x 1553
- Power
- Input voltage: 9...26VDC input range, ESD and EMC protected
- Power input: MIL-STD-1275D 1x
- Optional with MIL-STD-704F capability
- UPS: Integrated, supercap to support low input voltage during 250msec.
- Power Push Button ON / OFF
- Enviroment
- Storage Temperature: -45...+85°C
- Operating Temperature: -20...60°C, fanless
- Relative Humidity: 5...95% non condensing
- Schock 3 shocks in each dir. of the 3 axes, 35g, 18ms, half sine/ final peak saw tooth/ trapezoidal
- Vibration broad-band random (operating) 10Hz-250Hz, 5.4m/s2, 10 minutes
- Vibration broad-band random (operating after shock) 10Hz-250Hz, 42.5m/s2, 5 hours
- Dimension: 320 x 265.5 x 70.5 mm
- Standard Compliance
- The MILCOTS-38C1 is designed to meet or exceed the most common standards. Particular references are:
- EMC: EN 55022, EN 55024, EN 61000, MIL-STD-461E
- Shock & Vibration: EN 60068
- Environmental & Safety: EN 50155, MIL-STD-810F, EN 60601, EN 60950
- Approval List: CE, IEC 60945, IACS E10
SWaP-C Mission Computer mit typischen Flugzeug-Schnittstellen wie 1553, CAN, 12 seriellen Schnittstellen und 24 DIOs. Die Lösung ist in einem kompakten IP67-Gehäuse mit insgesamt zehn MIL-Steckverbindern installiert.
Der Mission Control Computer ist eine leichte und kompakte Lösung zur Anbindung an verschiedene Bussysteme, Instrumente und Messsysteme. Um eine langfristige Verfügbarkeit (10+ Jahre) zu gewährleisten, werden die Intel i7 CPUs aus der Embedded Roadmap sowie andere langfristig verfügbare Komponenten verwendet.
Das CPU-Boards ist so konzipiert, dass alle wärmeerzeugenden Teile direkt an das kompakte chromatierte und pulverbeschichtete Aluminiumgehäuse montiert bzw. angeschlossen werden. Das bietet die beste passive Kühlung und vermeidet die Notwendigkeit von empfindlichen Heatpipes. Die PIP-Familie, die in Mission Control Computern und Servern verwendet wird, ist speziell für extreme Umgebungsbedingungen entwickelt worden.
Die Eingangsleistung der Lösung unterstützt die verschiedenen erforderlichen MIL-STDs.
Eingangsleistungsbereiche gehen von 9-36VDC, optional kann jede andere Spannung (z.B. 110V Flugzeugstrom) realisiert werden. Für die typischen Eingangsleistungsschwankungen und Unterbrechungen in Fahrzeugen und Flugzeugen kann MPL ein robustes USV-System (BOLERO) integrieren. Die USV kann bei -40...+75°C betrieben werden. Das komplette System ist auch für erweiterte Temperaturen ohne Lüfter erhältlich.
Schnelle Prototyp-Lösung
Technisch gesehen kann der gleiche Aufbau wie bei Schnellprototypen und Machbarkeitsstudien, bei der Entwicklung von SW ohne lange Vorlaufzeiten und teure Prototypen angeboten werden. Nach der Freigabe und Verifizierung auf dem Schreibtisch kann die gleiche Lösung mit den gleichen Boards in ein IP67-Gehäuse mit 38999 Steckverbindern oder als Open-Frame-Version zur Integration in ein bestehendes Gehäuse oder einen bestehenden Schrank eingebettet werden.
Technische Eigenschaften MILCOTS-38C1 (weitere Optionen auf Anfrage verfügbar):
- Prozessor: Intel i7 CPU 3. Generation, 2 / 4 Cores, 2.5 / 3.2 GHz, 6 MB L2 Cache (andere CPUs bis Gen. 9 möglich)
- TPM 1.2 with EAL4.0 Unterstützung
- Hauptspeicher: 12GB DDR3 (mit anderen CPUs bis zu 32GB DDR4, mit ECC)
- Massenspeicher: 1x 2.5” SATA (entfernbar)
- Schnittstellen
- Wartung: 1x DVI / 3x USB / 1x CAN
- 24x Digital Output
- 24x Digital Input
- LAN: 2x GbE
- Serielle Schnittstellen: 4x RS422, 4x RS422, 4x isolated RS232, 4x RS232
- Avionics Data Bus: 4x 1553
- Stromversorgung
- Eingangsspannung: 9...26VDC, ESD und EMC geschützt
- Stromeinspeisung: MIL-STD-1275D 1x
- Optional mit MIL-STD-704F Fähigkeit
- UPS integriert, Supercap zur Unterstützung niedriger Eingangsspannung während 250 msec.
- Schalter ON / OFF
- Umgebung
- Lagerungstemperatur: -45...+85°C
- Betriebstemperatur: -20...60°C, lüfterlos
- Relative Feuchtigkeit: 5...95% nicht kondensierend
- Schock: 3 Stöße in jeder Richtung der 3 Achsen, 35g, 18ms, Halbsinus/ final peak saw tooth/ trapezoidal
- Vibration: breitbandig randomisiert (im Betrieb) 10Hz-250Hz, 5.4m/s2, 10 Minuten
- Vibration: breitbandig randomisiert (im Betrieb nach Shock) 10Hz-250Hz, 42.5m/s2, 5 Stunden
- Dimensionen: 320 x 265.5 x 70.5 mm
- Standardkonformität
- Der MILCOTS-38C1 wurde entwickelt, um die gängigsten Normen zu erfüllen oder zu übertreffen. Besondere Referenzen sind:
- EMV: EN 55022, EN 55024, EN 61000, MIL-STD-461E
- Schock & Vibration: EN 60068
- Umwelt & Sicherheit: EN 50155, MILD-STD-810F, EN 60601, EN 60950.
- Genehmigungsliste: CE, IEC 60945, IACS E10
Bitte kontaktieren Sie systerra für die Konfiguration - wir beraten Sie gerne
|