Multi I/O Card: Quad Port USB 3.0, Dual GbE, Option 8HP Front Panel w. RS-232 or CAN FD
|
The SBF-CROSSOVER is a peripheral slot card for CompactPCI® Serial systems, equipped with four individual USB 3.0 compliant controllers, and two Gigabit Ethernet NICs, all wired for front I/O. In addition, a PCI Express® Mini Card socket is provided on-board, which can be used e.g. for a fieldbus I/O module such as CAN FD. Furthermore, a quad port UART is available for RS-232 or RS-485 communication.
The SBF-CROSSOVER can be installed into any PCI Express® enabled peripheral slot of a CompactPCI® Serial backplane (PCIe® x4 or fat pipe slot recommended for optimum performance). All on-board devices are PCI Express® based. The front panel USB and Ethernet jacks are wired to individual controllers each, thus achieving the full data throughput on all connectors concurrently.
Features
- PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card
- Single Size Eurocard 3U 4HP 100x160mm2
- Option 8HP front panel width
- CPCI-S backplane connector P1
- PCIe x 4 upstream - Gen2 (5GT/s) required for optimum performance
PCI Express® Interface
- PCI Express® 9-port 12-lane packet switch PEX8614
- Upstream port: PCI Express® x4 Gen2 (5GT/s) supported
- Downstream ports: 8 x PCIe® x1 (4 x USB controllers, 2 x Ethernet NICs, 1 x Mini Card socket, 1 x UART)
USB Interfaces
- 4 x Texas Instruments PCI Express® dual port USB 3.0 controller TUSB7320
- USB 3.1 Gen1 (formerly USB 3.0) xHCI (eXtensible host controller interface) SuperSpeed supported
- USB 2.0 high-speed, full-speed, low-speed supported
- 4 x front panel Type A USB 3.0 host connectors
- VBUS (+5V) 1.5A high current power switches assigned to front panel connectors
- Option on-board Type-A connector, suitable for on-board USB stick
- USB 2.0 wired to PCIe® Mini Card socket
Networking
- Two networking interface controllers (NIC), 1000BASE-T, 100BASE-TX, 10BASE-T connections
- Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY
- IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
- IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams
- IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
- Two GbE ports via RJ45 front panel jacks (option 2 x M12-X connectors with mezzanine module P01)
PCI Express® Mini Card
- PCI Express® Mini Card socket, full-size or half-size modules
- Micro SIM card holder associated (15mm x 12mm ETSI TS 102 221 V9.0.0, Mini-UICC)
- PCI Express® Mini Cards of both styles supported: USB and PCIe® based
- Suitable for wireless applications
- Suitable for fieldbus modules e.g. CAN-FD, and industrial Ethernet modules (real time networking)
- Custom specific F/P design for additional pigtail SMB antenna connectors (8HP or wider)
- Custom specific F/P design for non-radio applications e.g. CAN-FD (8HP or wider)
Applications
- Mixed I/O: USB - Ethernet - UART - fieldbus or wireless
- Flexible usage by means of Mini Card socket (PCIe® or USB module)
- Data acquisition, data translation, gateway
- Fieldbus or real time networking
- IIOT, edge computing
For more technical details please refer to the datasheet
Ordering Options
| Manuf. Part No | | Part Description |
| SBF-0100-CROSSOVER | | 4x USB 3.0 controller, 2x GbE NIC, 4HP front panel (2 x GbE RJ45, 4x USB 3.0 Type-A) |
| SBF-0200-CROSSOVER | | 4x USB 3.0 controller, 2x GbE NIC, quad UART, PCIe Mini Card socket (e.g. for CAN FD module), 8HP front panel (2x GbE RJ45, 4x USB 3.0 Type-A) |
| SBF-0300-CROSSOVER | | 1x USB 3.0 controller, 2x GbE NIC, PCIe Mini Card socket (e.g. for CAN FD module), 4HP front panel (2x GbE RJ45) |
|
|
