The PMC compatible module TPMC700 has 32 (16) digital outputs with galvanic isolation via optocouplers. All outputs resist short-circuits and are protected against thermal overload. The output drivers are capable of driving 0.5A continuous per channel as high side switch. A hardware watchdog clears all outputs in case of trigger failure.
The TPMC700-1xR provides front panel I/O with a HD50 SCSI-2 type connector, the TPMC7002xR provides P14 I/O.
Software Support (TPMC700-SW-xx) is available for different operating systems.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- 32 or 16 digital high side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Front panel I/O or P14 I/O
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC700-10R | | 32 Digital Outputs, High Side 24V 0.5A, HD50: 32 digital outputs, 24V DC 0.5A, optically isolated; High side switch; Overload and short circuit protection; HD50 SCSI-2 type connector in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -25°C to +85°C |
| TPMC700-11R | | 16 Digital Outputs, High Side 24V 0.5A, HD50: Same as TPMC700-10R but 16 outputs |
| TPMC700-20R | | 32 Digital Outputs, High Side 24V 0.5A, P14 I/O: Same as TPMC700-10R but P14 I/O |
| TPMC700-21R | | 16 Digital Outputs, High Side 24V 0.5A, P14 I/O: Same as TPMC700-11R but P14 I/O |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC700-DOC | | User Manual for TPMC700 |
| TPMC700-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TPMC700-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TPMC700-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TPMC700-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TPMC700-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TA101 | | HD50 Cable: 1.8 m cable with two 50 pin male SCSI-2 type connectors. The permissible maximum voltage for the TA101 is 30V DC. |
| TA201 | | HD50 Terminal Block: 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA201 is 30V DC. |
| TA301 | | Cable Kit for Modules with HD50 Connector: 1.8 m cable with two 50 pin male SCSI-2 type connectors; 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA301 is 30V DC. |
| TPIM001 | | PIM I/O Module with 50 pin Connector: PIM I/O module used with any PIM carrier; I/O lines 1 to 50 routed to a HD50 SCSI-2 type connector in EMI front panel; Operating temperature -40°C to +85°C |
|
