The TPMC600 is a PMC compatible module and has 32 digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with a freely programmable debounce time.
Software Support (TPMC600-SW-xx) for different operating systems is available.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- PCI r2.2 compliant interface, 32 bit, 33 MHz
- 3.3V and 5V PCI Signaling Voltage
- Board size: 149 mm x 74 mm
- 32 / 16 interrupt generating digital inputs
- 24 V signal voltage for inputs, other voltages on request
- Optocoupler for galvanic isolation of inputs to computer
- All inputs isolated to each other in groups of four inputs
- Protection against confusing the pole
- Programmable electronic debounce circuit (7 μs to 440 ms in steps of 7 μs)
- Operating temperature: -40°C...+85°C
Ordering Options
Manuf. Part No. | | Product Description |
TPMC600-10R | | 32 Digital Input, 24V, isolated, pgm. interrupts, pgm. debounce, HD50: 32 digital inputs; 24V DC, optically isolated; Fully programmable interrupt capabilities; Electronic debounce; HD50 SCSI-2 type connector in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C |
TPMC600-20R | | 32 Digital Input, 24V, isolated, pgm. interrupts, pgm. debounce, P14 I/O: Same as TPMC600-10R but P14 I/O |
Software and Documentation
Manuf. Part No. | | Product Description |
TPMC600-DOC | | User Manual for TPMC600 |
TPMC600-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
TPMC600-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
TPMC600-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
TPMC600-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
TPMC600-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
Manuf. Part No. | | Product Description |
TA101 | | HD50 Cable: 1.8 m cable with two 50 pin male SCSI-2 type connectors. The permissible maximum voltage for the TA101 is 30V DC. |
TA201 | | HD50 Terminal Block: 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA201 is 30V DC. |
TA301 | | Cable Kit for Modules with HD50 Connector: 1.8 m cable with two 50 pin male SCSI-2 type connectors; 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA301 is 30V DC. |
TPIM001 | | PIM I/O Module with 50 pin Connector: PIM I/O module used with any PIM carrier; I/O lines 1 to 50 routed to a HD50 SCSI-2 type connector in EMI front panel; Operating temperature -40°C to +85°C |
|