16 Digital Inputs 24 V, 16 Digital Outputs 24 V / 0.5 A
|
The TPMC671 is a standard single-width 32 bit PMC with 16 24V digital inputs galvanically isolated from the computer system by optocoupler. The inputs are also potential free to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have a common electronic debounce circuit with a freely programmable debounce time. All inputs can generate an interrupt. The signal edge handling is programmable to interrupt on rising, falling or both edges of the input signal.
The TPMC671 has 16 digital high side or low side switches (build option) with galvanic isolation from the computer system by optocoupler. The outputs are also isolated against each other in groups of four outputs. All outputs are protected against short-circuit and thermal overload. The output drivers are capable of driving 0.5A continuous per channel. A hardware watchdog clears all outputs in case of trigger fail. The TPMC671-1xR provides front panel I/O, the TPMC671-2xR provides P14 I/O.
Software Support (TDRV003-SW-xx) for different operating systems is available.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- 16 digital inputs (24 V)
- Defined switching points
- Programmable debounce circuit
- Input events can generate interrupts
- 16 digital high side or low side switches (24 V / 0.5 A)
- Short-circuit protection
- Thermal overload protection
- Hardware watchdog
- All lines are galvanically isolated from system by optocouplers
- Input lines are potential free against each other
- Switching lines are isolated in groups of 4 against each other
- Front panel I/O or P14 I/O
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC671-10R | | 16 Dig. In (24V, isolated, pgm. interrupts, pgm. Debounce), 16 Dig. Out (High Side 24V 0.5A), HD68: 16 digital inputs, 24V, optically isolated, fully programmable interrupt capabilities, electronic debounce; 16 digital high side switch outputs, 24V DC 0.5A, optically isolated; Overload and short circuit protection; HD68 SCSI-3 type connector in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -25°C to +85°C |
| TPMC671-11R | | 16 Dig. In (24V, isolated, pgm. interrupts, pgm. Debounce), 16 Dig. Out (Low Side 24V 0.5A), HD68: 16 digital inputs, 24V, optically isolated, fully programmable interrupt capabilities, electronic debounce; 16 digital low side switch outputs, 24V DC 0.5A, optically isolated; Overload and short circuit protection; HD68 SCSI-3 type connector in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -25°C to +85°C |
| TPMC671-20R | | 16 Dig. In (24V, isolated, pgm. interrupts, pgm. Debounce), 16 Dig. Out (High Side 24V 0.5A), P14 I/O: Same as TPMC671-10R, but P14 I/O |
| TPMC671-21R | | 16 Dig. In (24V, isolated, pgm. interrupts, pgm. Debounce), 16 Dig. Out (Low Side 24V 0.5A), P14 I/O: Same as TPMC671-11R, but P14 I/O |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC671-DOC | | User Manual for TPMC671 |
| TDRV003-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TDRV003-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TDRV003-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TDRV003-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TDRV003-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TA104 | | HD68 Cable: 1.8 m cable with two 68 pin male SCSI-3 type connectors. The permissible maximum voltage for the TA104 is 30V DC. |
| TA203 | | HD68 Terminal Block: 68 pin terminal block with 68 pin female SCSI-3 type connector |
| TA304 | | Cable Kit for Modules with HD68 Connector: 1.8 m cable with two 68 pin male SCSI-3 type connectors; 68 pin terminal block with 68 pin female SCSI-3 connector. The permissible maximum voltage for the TA304 is 30V DC. |
| TPIM002 | | PIM I/O Module with 68 pin Connector: PIM I/O module used with any PIM carrier; I/O lines routed to a HD68 SCSI-3 type connector in EMI front panel; Operating temperature -40°C...+85°C |
|
|
