The TPMC680 is a standard single-width 32 bit PMC module offering 64 bit of TTL I/O arranged in 8 x 8 bit ports. Direction of the I/O lines is software programmable for each of the 8 bit ports. Each 8 bit port is built up using a TTL bus transceiver. Each line is protected against ESD and overvoltage.
Each input can generate an interrupt. Signal edge handling is programmable to interrupt on rising and/or falling edge of the input signal. Interrupts can be enabled and disabled for each bit. For interrupt source detection the status of each bit can be read from the interrupt status register.
The TPMC680 supports three basic modes of operation: standard byte I/O with interrupts, 2 x 16 bit port with handshake and 1 x 32 bit port with handshake. The two handshake modes offer double buffered inputs or outputs and interlocked or pulsed handshake output protocol.
In byte I/O mode it is possible to read or write synchronously all 64 lines.
The TPMC680 provides front panel I/O via a HD68 SCSI-3 type connector and rear panel I/O via P14.
Software Support (TPMC680-SW-xx) for different operating systems is available.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- 64 TTL I/O lines (8 x 8 bit ports)
- Programmable I/O direction (port wise)
- ESD and overvoltage protection
- Input events can be enabled and detected individually for each I/O line
- All 64 I/O lines are synchronously readable and writable (byte I/O mode)
- Handshake lines available in port mode
- Front panel I/O via HD68 SCSI-3 type connector
- Rear I/O via P14
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC680-10R | | 64-bit TTL I/O, 8 x 8-bit Port, interrupts, handshake modes, HD68, 7 ports available at P14 I/O: 64 bit TTL I/O; 8 x 8-bit ports; HD68 connector in front panel, 7 of these 8 bit ports available at P14; basic operating modes: byte I/O, 2 x 16 bit port with handshake, 1 x 32 bit port with handshake; Interrupt capability; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC680-DOC | | User Manual for TPMC680 |
| TPMC680-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TPMC680-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TPMC680-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TPMC680-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TPMC680-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TA104 | | HD68 Cable: 1.8 m cable with two 68 pin male SCSI-3 type connectors. The permissible maximum voltage for the TA104 is 30V DC. |
| TA203 | | HD68 Terminal Block: 68 pin terminal block with 68 pin female SCSI-3 type connector |
| TA304 | | Cable Kit for Modules with HD68 Connector: 1.8 m cable with two 68 pin male SCSI-3 type connectors; 68 pin terminal block with 68 pin female SCSI-3 connector. The permissible maximum voltage for the TA304 is 30V DC. |
| TPIM002 | | PIM I/O Module with 68 pin Connector: PIM I/O module used with any PIM carrier; I/O lines routed to a HD68 SCSI-3 type connector in EMI front panel; Operating temperature -40°C...+85°C |
|
