16 / 8 Digital Inputs 24 V, 16 / 8 Digital Outputs 24 V / 0.5 A
|
The TPMC670 is a standard single-width 32 bit PMC with 16 / 8 24V digital inputs galvanically isolated from the computer system by optocoupler. The inputs are also potential free to each other in groups of four inputs. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have a common electronic debounce circuit with a freely programmable debounce time. All inputs can generate an interrupt. The signal edge handling is programmable to interrupt on rising, falling or both edges of the input signal.
The TPMC670 has 16 / 8 digital high side switches with galvanic isolation from the computer system by optocoupler. The outputs are also isolated against each other in groups of four outputs. All outputs are protected against short-circuit and thermal overload. The output drivers are capable of driving 0.5A continuous per channel. A hardware watchdog clears all outputs in case of trigger fail. The TPMC670-1xR provides front panel I/O, the TPMC670-2xR provides P14 I/O.
Software Support (TDRV003-SW-xx) for different operating systems is available.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- PCI 3.0 compatible interface
- 3.3V and 5V PCI Signaling Voltage
- Board size: 149 mm x 74 mm
- 16 / 8 interrupt generating digital inputs
- 24 V signal voltage for inputs
- Optocoupler for galvanic isolation
- All inputs isolated to each other in groups of four inputs
- Programmable electronic debounce circuit (7 μs to 440 ms in steps of 7μs),
- 16 / 8 digital outputs, high side switches
- 24 V signal voltage, current per output 0.5 A
- Optocoupler for galvanic isolation
- Outputs are short-circuit protected
- Outputs are isolated to each other in groups of four outputs
- Outputs protected against thermal overload
- Watchdog timer resets all channels in case of trigger failure
- Operating temperature -20°C to +85°C
- MTBF (MIL-HDBK217F/FN2 GB 20°C):
TPMC670-x0x: 850.000 h
TPMC670-x1x: 979.000 h
5 Years Warranty
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC670-10R | | 16 Digital In (24V, isolated, pgm. interrupts, pgm. Debounce), 16 Digital Out (High Side 24V 0.5A), HD50: 16 digital inputs, 24V, optically isolated, fully programmable interrupt capabilities, electronic debounce; 16 digital outputs, 24V DC 0.5A, optically isolated; High side switch; Overload and short circuit protection; HD50 SCSI-2 type connector in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -25°C to +85°C |
| TPMC670-11R | | 8 Digital In (24V, isolated, pgm. interrupts, pgm. Debounce), 8 Digital Out (High Side 24V 0.5A), HD50: Same as TPMC670-10, but 8 digital inputs and 8 digital outputs |
| TPMC670-20R | | 16 Dig. In (24V, isolated, pgm. interrupts, pgm. Debounce), 16 Dig. Out (High Side 24V 0.5A), P14 I/O: Same as TPMC670-10R, but P14 I/O |
| TPMC670-21R | | 8 Dig. In (24V, isolated, pgm. interrupts, pgm. Debounce), 8 Dig. Out (High Side 24V 0.5A), P14 I/O: Same as TPMC670-11R, but P14 I/O |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC670-DOC | | User Manual for TPMC670 |
| TDRV003-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TDRV003-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TDRV003-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TDRV003-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TDRV003-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TA101 | | HD50 Cable: 1.8 m cable with two 50 pin male SCSI-2 type connectors. The permissible maximum voltage for the TA101 is 30V DC. |
| TA201 | | HD50 Terminal Block: 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA201 is 30V DC. |
| TA301 | | Cable Kit for Modules with HD50 Connector: 1.8 m cable with two 50 pin male SCSI-2 type connectors; 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA301 is 30V DC. |
| TPIM001 | | PIM I/O Module with 50 pin Connector: PIM I/O module used with any PIM carrier; I/O lines 1 to 50 routed to a HD50 SCSI-2 type connector in EMI front panel; Operating temperature -40°C to +85°C |
|
|
