Available as a mezzanine add-on expansion board to the CCM-BOOGIE and successor CPU carrier cards, the main purpose of the C41-CFAST is to provide a CFast™ host connector for attachment of a CFast™ storage card, as a rugged and fast mass storage media, which can be easy replaced. The C41-CFAST is designed to fit into the 4HP (20.32mm pitch) envelope of a CPCI CPU carrier board.
Further more, the C41-CFAST can be optionally equipped with an USB Silicon State Drive (SSD) module, or an USB type A host receptacle. In addition, two SATA connectors (latching headers) are optionally available on the C41-CFAST, for attachment of system internal drives by ordinary SATA cable harnesses.
Features
- Host I/F Connector (Bottom Mount, Towards Carrier)
- High Speed mezzanine connector P-MEZ suitable e.g. for CCM-BOOGIE, PC1-GROOVE, SC1-ALLEGRO and successor CPU carrier boards, and also side cards such as PCS-BALLET
- conveys 3 x SATA, 2 x USB 2.0
- SATA Port Usage
- SATA1, bound to the on-board CFast™ host connector CF1 (typically sourced from the PCH southbridge on a CPU carrier board)
- SATA2 and SATA3 (may be derived from a CPU carrier board secondary SATA controller), wired to the optional vertical SATA latching connectors P-SATA2 & P-SATA3 (additional headroom is required beyond 4HP for this option)
- USB Port Usage
- Option USB 2.0 type A receptacle J-USB3, horizontal mount
- Optional 2.0mm pitch pin header P-UFD1 for industrial grade low profile USB SSD mezzanine module
- CFast™ Connector
- Docking connector CF1 for on-board CFast™ card
- 7 pins signal section + 17 pins power section
- Top Mount Connectors Summary
- CF1 for a SATA CFast™ Card
- P-SATA2 and P-SATA3 cable connectors for attachment of system internal SATA drives
- Option P-UFD1 for a low profile USB 2.0 SSD mezzanine module (exclusive to J-USB3)
- Option J-USB3 for system internal attachment of USB 2.0 devices (exclusive to P-UFD1)
- Thermal Conditions
- Operating temperature: 0°C ... +70°C
- Option -40°C ... +85°C
- Environmental Conditions
- Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- RoHS compliant
- Coating, Sealing, Underfilling on request
- Long Term Availability
- EC Regulations
- EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- 2002/95/EC (RoHS)
Ordering Options
Manuf. Part No | | Part Description |
C41-1-CFAST | | Add-on mezzanine module, CFast SSD card adapter, stack height 9mm for CCM-BOOGIE, PC1-GROOVE or similar |
|