Available as a mezzanine add-on expansion board to several EKF CPU carrier cards, the main purpose of the C44-SATA is to accommodate a 2.5-inch SATA drive, either SSD (Solid State Drive) or HDD (Hard Disk Drive). In addition, the C44-SATA provides eSATA and USB connectors for front panel I/O. Since only a few active components are required on the C44-SATA PCB, it is a reasonable low cost system expansion module.
Two eSATA connectors are available via the C44-SATA front panel, for attachment of external drives by eSATA cable harnesses. In addition, three USB 2.0 receptacles are situated in the front panel, for general use.
The C44-SATA mounts on top of the CPU carrier board, with a 4HP pitch off-stand, resulting in a 8HP front panel for the entire dual-board assembly.
Features
- Proprietary size mezzanine module 66mm x 95mm
- Fits basically into the 4HP (20.3mm) envelope of the CPU carrier board
- Typically delivered as a ready to use assembly unit
- Mounting position right (on top of CPU board)
- 8HP front panel width in total (C44-SATA version with front I/O connectors)
- up to 4 x SATA channels (3 in use on C44-SATA)
- up to 4 x USB ports (3 in use on C44-SATA)
- Thermal Conditions
- Operating temperature: -40°C ... +85°C (depends on SATA drive in use)
- Environmental Conditions
- Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- RoHS compliant
- Coating, Sealing, Underfilling on request
- Long Term Availability
- EC Regulations
- EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- 2002/95/EC (RoHS)
For more specific details, please refer to the attached datasheet
Ordering Options
Manuf. Part No | | Part Description |
C44-1-SATA | | 3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board with 2.5-inch SATA SSD or HDD option, front panel I/O 2 x eSATA (RAID) and 3 x USB |
|