The SE2-MOOD is a peripheral slot card for CompactPCI® Serial systems, equipped with three M.2 sockets for SSD (Solid-State Drive) modules.
Two of the M.2 sockets are suitable for NVMe type SSD modules, with a PCIe x4 Gen3 interface for superior data transfer rates. When used as main mass storage devices in a system, the NVMe SSDs can speed up the overall system performance dramatically.
The third (optional) M.2 connector can accommodate a classic AHCI SATA style SSD, used e.g. as backup drive or legacy systems boot device.
With respect to the NVMe sockets, the SE2-MOOD is suitable for all NGFF SSD module sizes defined by the M.2 specification up to the 22110 form factor (SATA socket max. 2280). In order to avoid mix-up, the M.2 sockets are mechanically coded. The NVMe module sockets are provided with an M-key, and the SATA module connector features a B-key, according to the PCI Express® M.2 Specification (PCI-SIG).
For optimum NVMe SSD module performance, a PCI Express® x8 enabled backplane slot would be required (CompactPCI® Serial fat pipe slot). In addition, SATA backplane support is needed for the SATA SSD module.
Features
- PICMG® CompactPCI® Serial Standard (CPCI-S.0)
- Single size Eurocard 3U 4HP 100x160mm2
- Suitable for CompactPCI® Serial peripheral slot (PCI Express® & SATA enabled)
- CompactPCI® Serial fat pipe slot PCIe x8 or at least peripheral slot PCIe x4 recommended
- CompactPCI® Serial backplane connectors P1 & P2 for PCI Express® x8 and SATA
M.2 NVMe
- Designed according to PCI-SIG® PCI Express® M.2 Specification (aka NGFF)
- Dual M.2 NVMe SSD module sockets (M-key) pin-out according to 'Socket 3 PCIe x4 SSD'
- M.2 NVMe module size 22110, 2280, 2260, 2242, 2230, 4.2H (accepts double-sided modules)
- On-board PCI Express® Gen3 (8GTps) packet switch 3 ports 16 lanes for maximum NVMe performance via both M.2 NVMe module sockets simultaneously
- Maximum performance with backplane slot PCIe x8 Gen2/3
- Primarily for NVMe protocol based M.2 SSD modules
- Suitable also for OEM legacy AHCI protocol based M.2 modules (PCIe SATA controller)
- 2TB NVMe modules available as of current for a total of 4TB
- Individual drive configuration or soft RAID operation
- Boot capability requires NVMe enabled BIOS for NVMe protocol modules
- Recommended usage as high speed mass storage for demanding applications
M.2 SATA (Option)
- M.2 SATA SSD module socket (B-key) pin-out according to 'Socket 2 SATA SSD'
- M.2 SATA module size 2280, 2260, 2242, 2230, 4.2H (accepts double-sided module)
- Requires SATA enabled backplane slot
- SATA 6G redriver circuit on-board for optimum signal integrity
- Recommended for additional medium speed mass storage and backup
Front Panel IO (Option)
- Gigabit Ethernet (RJ45) - requires GbE enabled backplane slot (passed through from P6)
- USB 3.0 (Type-A) - requires USB enabled backplane slot (passed trough from P1)
Ordering Options
Manuf. Part No | | Part Description |
SE2-0100-MOOD | | Carrier card for PCIe x 4 M.2 SSD modules (NVMe), 2 x M.2 socket, PCIe Gen3 packet switch 8+4+4 lanes additional M.2 SATA socket |
|