The MGate 5134 is an industrial Ethernet gateway for converting Modbus RTU/ASCII/TCP to PROFINET network communications. To integrate
existing Modbus devices onto a PROFINET network, use the MGate 5134 as a Modbus client to collect data and exchange data with the PROFINET
host. All models are protected by a rugged and compact metal housing, are DIN-rail mountable, and offer built-in serial isolation. The rugged
design is suitable for industrial applications such as factory automation, power, oil and gas, water and wastewater, and other process automation
industries.
Easy Configuration
The MGate 5134 gateways are provided with a web console to make configuration easy without having to install an extra utility. In addition, HTTPS
encryption of communication ensures higher network security. In most data-acquisition applications, configuration of devices with Modbus
commands can be time-consuming and increase costs. The MGate 5134 gateways provide offline configuration via a CSV file to help complete the
Modbus settings quickly. The gateways also come with a GSDML export function to enable export of these files so that they can be imported to
PROFINET PLCs. The MGate gateways provide software-configurable pull high/low and termination resistor settings for RS-485 2-wire to reduce
efforts by eliminating the need to open the chassis.
Easy Troubleshooting
The MGate 5134 gateways provide a variety of maintenance functions to reduce troubleshooting time and cost, including LED indicators, protocol
diagnostics, traffic monitor, and tag view. These tools help you capture and check data to easily identify the root cause of issues, especially during
the installation stage. The MGate gateways also come with status monitoring and fault protection functions. The status monitoring function notifies
a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of
each end device and then issues alarms to notify operators. The fault protection function executes actions pre-defined by the user when a host
gets disconnected to prevent the end devices from going offline for long periods of time.
Features
- Protocol conversion from Modbus to PROFINET
- Supports PROFINET IO device
- Supports Modbus RTU/ASCII/TCP client
- Flexible deployment with Ethernet cascading and dual subnet
- Embedded traffic monitoring/diagnostic information for easy troubleshooting
- Easy device configuration via a web-based console
- microSD card for configuration backup/duplication
- Supports dual redundant DC power inputs and 1 relay output
- Serial port with 2 kV isolation protection
- -40 to 75°C wide operating temperature models available
- Developed according to IEC 62443-4-2 with Secure Boot
- Standards and Certifications
- Safety: EN 61010-2-201, UL 61010-2-201
- EMC: EN 61000-6-2/-6-4
- EMI: FCC Part 15B Class A
- Freefall: IEC 60068-2-31
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6, IEC 60068-2-64
- 5 Years Warranty
Ordering Options
Manuf. Part No | | Part Description | |
MGate 5134 | | 1-port Modbus RTU/ASCII/TCP-to-PROFINET gateway, -10...+60°C operating temperature |
|
MGate 5134-T | | 1-port Modbus RTU/ASCII/TCP-to-PROFINET gateway, -40...+75°C operating temperature |
|
Optional Accessories
Manuf. Part No | | Part Description | |
Mini DB9F-to-TB | | DB9 female to terminal block connector |
|
WK-36-02 | | DIN-rail/wall-mounting kit: 2 plates with 6 screws |
|
|