MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All
models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.
Modbus is one of the most widely used industrial communication protocols, and EtherNet/IP, PROFINET, and PROFIBUS are commonly used in
factory automation and process automation. The MGate 5111 supports both Modbus RTU/ASCII/TCP master and slave modes, so that you can
easily connect your Modbus device to PROFIBUS PLCs or DCSs, such as Siemens PLCs.
For system integration, the MGate 5111 can connect to EtherNet/IP PLC/SCADA systems, such as Rockwell Automation PLCs, to PROFIBUS PLC/
DCS systems, or between a new Siemens PLC system that supports PROFINET to an existing PROFIBUS system. The MGate 5111 gateways are
designed for easy configuration and quick maintenance. A handy web console can be used to implement remote maintenance tasks, and the
configuration wizard UI lets you quickly set up your gateway. A comprehensive collection of troubleshooting tools reduce configuration time and system downtime. The rugged design is suitable for industrial applications, such as factory automation, power, oil and gas, water and wastewater, and other process automation industries.
Easy Configuration
The MGate 5111 series gateway has a friendly user interface that lets you quickly set up protocol conversion routines for most applications, doing away with what were often time-consuming tasks in which users had to implement detailed parameter configurations one by one. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5111 supports a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, firmware log functions are provided to record connection and Modbus maintenance events, and users can review log data remotely through the web console.
Variety of Maintenance Functions
The MGate 5111 supports Protocol Diagnose and Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues caused by incorrect software parameters, like slave IDs and register addresses, or incorrect command configurations, can be fished out with Protocol Diagnose and Traffic Monitor, which let you capture and check data to easily identify root causes. MGate 5111 gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators. When a PROFIBUS cable gets disconnected, the fault protection function executes actions on end devices identified by a pre-defined value set by the user.
Features
- Converts Modbus, PROFINET, or EtherNet/IP to PROFIBUS
- Supports PROFIBUS DP V0 slave
- Supports Modbus RTU/ASCII/TCP master/client and slave/server
- Supports EtherNet/IP Adapter
- Supports PROFINET IO device
- Effortless configuration via web-based wizard
- Built-in Ethernet cascading for easy wiring
- Embedded traffic monitoring/diagnostic information for easy troubleshooting
- Status monitoring and fault protection for easy maintenance
- microSD card for configuration backup/duplication and event logs
- Supports redundant dual DC power inputs and 1 relay output
- Serial port with 2 kV isolation protection
- -40...+75°C wide operating temperature models available
- Security features based on IEC 62443
- Standards and certifications
- EMC EN 61000-6-2/-6-4
- EMI CISPR 32, FCC Part 15B Class A
- Safety: EN 60950-1, UL 61010-2-201
- Hazardous Location: Class I Division 2, ATEX, IECEx
- Freefall IEC 60068-2-32
- Shock IEC 60068-2-27
- Vibration IEC 60068-2-6, IEC 60068-2-64
5 Years Warranty
Ordering Options
| Manuf. Part No | | Part Description | |
| MGate 5111 | | Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateway, 0...+60°C operating temperature |
|
| MGate 5111-T | | Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateway, -40...75°C operating temperature |
|
Accessories
| Manuf. Part No | | Part Description | |
| WK-51-01 | | Wall Mounting Kit |
|
| CBL-F9M9-150 | | DB9 female to DB9 male serial cable, 150 cm |
|
| CBL-F9M9-20 | | DB9 female to DB9 male serial cable, 20 cm |
|
| CBL-RJ45F9-150 | | RJ45 to DB9 female serial cable, 1.5 m |
|
| CBL-RJ45SF9-150 | | RJ45 to DB9 female serial shielded cable, 1.5 m |
|
| CBL-PJTB-10 | | Non-locking barrel plug to bare-wire cable |
|
| Mini DB9F-to-TB | | DB9 female to terminal block connector |
|
|
