EOL - Ethernet remote I/O with 24 DIOs, 10 AIs, and 3 RTDs for offshore wind power applications
Product phased out. Please call systerra for replacement options.
|
Industry-Proven Rugged Design
Installation of remote Ethernet I/O in offshore environments is a real challenge. It is critical to find devices properly designed for protected, safe use in these environments. Moxa’s ioLogik E1200H series with IEC 60945 certifications fulfills the need for devices suitable for such demanding industrial applications. Compactly packaged in a metal housing, this rugged hardware supports operating temperatures ranging from -40...+75°C, meeting the stringent demands of IEC 60945 for harsh offshore applications.
Daisy-Chain Topology Reduces Deployment Costs
Thanks to its two embedded Ethernet switch ports, the ioLogik E1200H remote Ethernet I/O allows you to create daisy-chain topologies for easy cabling. In distributed Ethernet data acquisition applications, panels, units, and cabinets are often located at remote sites where space is limited. The daisy-chain capability of the ioLogik E1200H series allows ioLogik E1200H units to connect in series either to each other or to other nearby Ethernet devices, drastically saving on both space and wiring costs.
Application: Offshore Remote Monitoring
Have you ever wondered where to find a rugged remote Ethernet I/O device for offshore facilities? You need something with the ability to
withstand extreme weather conditions, wide temperature changes, and that can be used in hazardous environments. With Moxa’s ioLogik
E1200H, you get a robust design that will meet your most stringent demands, ensuring your remote data acquisition applications are
reliable, consistent, and safe.
Features
- User-definable Modbus/TCP Slave addressing
- 2-port Ethernet switch for daisy-chain topologies
- Active communications with MX-AOPC UA Server
- Easy mass deployment and configuration with ioSearch utility
- Friendly configuration via web browser
- Simplify I/O management with MXIO library on either Windows or Linux platform
- IEC 60945 approval for harsh offshore environments
- Wide operating temperature range: -40...+75°C (-40 to 167°F)
ioLogik E1263H specific Features
- Configurable DIOs (by software): 24 channels
- Analog Inputs: 10 channels
- RTDs: 3 channels
- Isolation: 3k VDC or 2k Vrms
- Digital Input
- Sensor Type: Wet Contact (NPN or PNP), Dry Contact
- I/O Mode: DI or Event Counter (channels 0 to 7)
- Dry Contact: On: short to GND, Off: open
- Wet Contact (DI to GND): On: 0 to 3 VDC, Off: 10 to 30 VDC
- Common Type: 12 points per COM
- Counter Frequency: 250 Hz
- Digital Filtering Time Interval: Software configurable
- Digital Output
- Type: Sink
- I/O Mode: DO or Pulse Output (channels 0 to 7)
- Pulse Output Frequency: 500 Hz
- Over-Voltage Protection: 45 VDC
- Over-Current Protection: 2.6 A (4 channels @ 650 mA)
- Over-Temperature Shutdown: 175°C (typical), 150°C (min.)
- Current Rating: 200 mA per channel
- Analog Input
- Type: Differential input
- Resolution: 16 bits
- I/O Mode: Voltage / Current (software selectable)
- Input Range: 0 to 10 V, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
- Accuracy: ±0.5% FSR @ 25°C, ±1.0% FSR @ -40 and 75°
- Sampling Rate: All channels: 12 samples/sec, Per channel: 0.9 samples/sec
- Input Impedance: 10 mega-ohms (min.)
- Built-in Resistor for Current Input: 120 ohms
- RTDs
- Sensor Type: PT100 (-200 to 850°C)
- Input connection: 2- or 3-wire
- Sampling Rate: All channels: 12 samples/sec, Per channel: 0.9 samples/sec
- Resolution: 0.5°C
- Accuracy: ±0.5% FSR @ 25°C, ±1.0% FSR @ -40 and 75°C
- Input Impedance: 625 kilo-ohms
5 Years Warranty
Recommended replacement products:
ioThinx 4510
45MR-2600
45MR-2606
45MR-3800
45MR-6600
Ordering Options
| Manuf. Part No | | Part Description | |
| ioLogik E1263H-T | | Ethernet remote I/O with 2-port Ethernet switches, 24 DIOs, 10 AIs and 3 RTDs, -40...+75°C operating temperature |
|
| WK-90 | | optional wall mounting kit (can be purchased seperately) |
|
|
|
