The SF2-CANDY is a quad PCI Express® Mini Card carrier, suitable for CompactPCI® Serial systems. The board can be used together with PCIe® based CAN fieldbus modules, available as single-port, dual-port or even quad-port CAN controllers. This results in a scalable solution from 1 up to 16 CAN I/O ports, wired to a common D-SUB front panel connector. Validated CAN modules are available for classic CAN 2.0A/B, and also CAN FD (Flexible Data Rate).
Two front panel connector solutions are available from stock, either D-SUB 25-position for up to 8 CAN 2.0B ports, or D-SUB 50-position for up to 16 CAN-FD ports. Each CAN port is individually isolated for optimum fieldbus reliability.
The SF2-CANDY is equipped with an on-board PCI Express® packet switch, and can be installed into any peripheral slot of a CompactPCI® Serial backplane.
Features
- PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card
- Single size Eurocard 3U 4HP 100x160mm2
- Backplane connector P1 (peripheral slot PCIe® x1)
PCI Express® Interface
- Gen2 PCI Express® 6-port packet switch
- Upstream port: PCI Express® x1 Gen2 (5.0Gbps) or Gen1 (2.5Gbps) supported
- Downstream ports: 4 x PCIe® Mini Card, Gen1 and Gen2 support
PCI Express® Mini Card
- 4x PCI Express® Mini Card sockets, full-size or half-size modules, PCIe® based
- Validated with PEAK System PCAN-miniPCIe Dual Channel for CAN 2.0A and 2.0B
- Validated with PEAK System PCAN-miniPCIe FD Four Channel for CAN FD
Front Panel Connector
- 4 HP front panel design
- D-SUB 37-pin connector and cable harness for up to 4 x PCAN-miniPCIe (8 ports)
- D-SUB 50-pin connector and cable harness for up to 4 x PCAN-miniPCIe FD (16 ports)
- Custom specific front panel design, e.g. 8 x D-SUB 9-pin connectors with 12HP front panel width
For specifications of SF2-1080-CANDY (CAN 2.0A/B) and SF2-2160-CANDY (CAN FD) please refer to the Datasheet
Environment, Regulatory
- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution (coating, sealing, underfilling on request)
- RoHS compliant
- Operating temperature -40...+85°C (industrial temperature range)
- Storage temperature -40...+85°C, max. gradient 5°C/min
- Humidity 5%...95% RH non condensing
- Altitude -300m...+3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 39.6 years (carrier card)
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
Applications
- Test equipment for automotive networks
- Industrial automation
- Autonomous devices - IoT
- Medical equipment
Ordering Options
| Manuf. Part No. | | Product Description |
| SF2-1080-CANDY | | 3U/4HP cPCI-Serial CAN Controller 8x CAN at DSUB25 |
| SF2-2160-CANDY | | 3U/4HP cPCI-Serial CAN-FD Controller 16x CAN-FD at DSUB50 w/o daisy chain |
|
