Cookie Einstellungen
Diese Webseite verwendet ausschließlich notwendige Cookies, die für das Funktionieren von Login und Cookie-Hinweis unbedingt erforderlich sind. Statistik- und Werbe-Cookies kommen nicht zum Einsatz. Weitere Informationen finden Sie in unserer Datenschutzerklärung.
OK
TXMC889

Four Channel SFP Gigabit Ethernet Interface

Four Channel Intel I350 Gigabit Ethernet controller providing SerDes Interfaces; x4 PCI Express (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3; Four SFP Cages; Direct Attach Twinaxial Cable, SFPwire Active Optical Cable, 1000Base-SX, 1000Base-LX, 1000/100/10Base-T; 1 Mbit serial flash memory for Boot ROM, 128 Kbit EEPROM storing configuration data, Operating temperature -40°C to +85°C.

The TXMC889 is a Switched Mezzanine Card (XMC) compatible module providing a four channel Gigabit Ethernet Small Form Factor Pluggable (SFP) interface.

The XMC-Connector P15 provides access to the Intel" I350-AM4 quad port Gigabit Ethernet controller via an x4 PCIe link.

The TXMC889's SFP Cages accept various SFP transceiver modules. These four SFP hosts are connected to the Ethernet Controller's SerDes Interfaces.

The following transceiver modules have been successfully tested with the TXMC889:

o Intel XDACBL1M (SFP+ Direct Attach Twinaxial Cable)
o Finisar FCBG110SD1C01 (SFP+ SFPwire Active Optical Cable)
o Intel E10GSFPSR (SFP+ 1000BASE-SX)
o Finisar FTLX8574D3BCV (SFP+ 1000BASE-SX)
o Intel E10GSFPLR (SFP+ 10GBASE-LR or 1000BASE-LX)
o Finisar FTLX1475D3BCV (SFP+ 1000BASE-LX)
o Finisar FTLF8519P3BTL (SFP 1000BASE-SX)
o Finisar FTLF1318P3BTL (SFP 1000BASE-LX)
o Finisar FCLF8522P2BTL (SFP 1000BASE-T)

All compatible transceivers modules and replacements of the tested modules will also work properly with the TXMC889.

The controller is equipped with a 1 Mbit serial flash memory for Boot ROM and a 128 Kbit EEPROM storing configuration data. LEDs in the front panel indicate the different network activities.

For preconfigured variants of the hardware module containing transceiver modules, please contact TEWS.

The TXMC888-10R provides two 10GbE Interfaces via front panel SFP+ connectors.

Features
  • Short single-width XMC module
  • 4 channel SFP Gigabit
  • IPMI resource: FRU hardware definition information stored in on-board EEPROM
  • PXE and iSCSI boot (1 Mbit serial flash)
  • Configuration data (128 Kbit EEPROM)
  • IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Q VLAN
  • Front panel I/O (4 SFP connectors)
 
Ordering Options
Manuf. Part No    Part Description
TXMC889-10R  Four Channel SFP Gigabit Ethernet Interface. Four Channel Intel I350 Gigabit Ethernet controller providing SerDes Interfaces; x4 PCI Express (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3; Four SFP Cages; Direct Attach Twinaxial Cable, SFPwire Active Optical Cable, 1000Base-SX, 1000Base-LX, 1000/100/10Base-T; 1 Mbit serial flash memory for Boot ROM, 128 Kbit EEPROM storing configuration data, Operating temperature -40...+85°C
TXMC888-DOC  User Manual for TXMC888

Software Support for the Intel X82599ES at: www.intel.com
For operating systems not supported by Intel, please contact systerra
Return to last Page ...