Conduction Cooled, Two Channel 100/1000/2500/5000/10000 Mbit/s Ethernet
|
The TXMC397 is a Conduction Cooled Switched
Mezzanine Card (CCXMC) compatible module providing a
two channel Ethernet 100Base-TX / 1000Base-T /
2.5GBase-T / 5GBase-T / 10GBase-T interface.
The XMC-Connector P15 provides access to the Intel
X710-AT2 dual port 10GbE controller via an x8 PCIe link.
Both Ethernet interfaces support 100, 1000 Mbit/s and 2.5,
5, 10 Gbit/s transmission rates and the controller is
equipped with a 64 Mbit Serial Flash to support PXE and
iSCSI boot.
The two Ethernet interfaces of the TXMC397 are capable
of performing an auto negotiation algorithm which allows
both link-partners to determine the best link-parameters.
The TXMC397 supports IEEE 1588/802.1AS Precision
Time Protocol (PTP).
The TXMC397-10R routes two Ethernet ports to the Back
I/O P16 connector and they are both mapped in the X12d
range specified in VITA46.9 standard.
The TXMC397-20R routes two Ethernet ports to the Back
I/O P16 connector and they are both mapped in the X8d
range specified in VITA46.9 standard.
Both ports are galvanically isolated from the Ethernet
controllers and LEDs indicate the different network
activities.
The module meets the requirements to operate in
extended temperature range from -40°C to +85°C (Card
Edge Temperature).
Features
- Form Factor: Standard single-width CCXMC module conforming to ANSI/VITA 42.0
- Board size: 143.75 mm x 74 mm
- x8 PCI Express (Base Specification 3.0) compliant interface conforming to ANSI/VITA 42.3
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- Dual Port Intel™ X710-AT2 10 Gigabit Ethernet controller
- Back I/O P16 (VITA46.9 X12d or X8d mapping)
- 10GBase-T / NBase-T / 1000Base-T / 100Base-TX
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- 64 Mbit serial flash storing configuration data and providing memory for Boot ROM for both channels
- Operating temperature -40°C to +85°C (Card Edge)
- MTBF (MIL-HDBK217F/FN2 GB 20°C)
- TXMC397-10R: tbd
- TXMC397-20R: tbd
Ordering Options
Manuf. Part No | | Part Description |
TXMC397-10R | | CCXMC, Two Channel 100/1000/2500/5000/10000 Mbit/s Ethernet, Intel X710-AT2, P16 Back I/O (X12d) |
TXMC397-20R | | CCXMC, Two Channel 100/1000/2500/5000/10000 Mbit/s Ethernet, Intel X710-AT2, P16 Back I/O (X8d) |
TXMC397-DOC | | User Manual |
Software Support for the Intel™ X710-AT2 at: www.intel.com
For operating systems not supported by Intel, please contact systerra
|
|