TXMC391

NEW - Conduction Cooled, 4 Channel 1000BASE-KX Ethernet

The TXMC391 is a Conduction Cooled Switched Mezzanine Card (CCXMC) compatible module providing a four channel 1000Base-KX Ethernet interface

A PCIe Switch provides access to the Intel I210IS Gigabit Ethernet controllers. Each Ethernet interface supports 1000 Mbit/s transmission rate and is equipped with a 16 Mbit Serial Flash to support PXE and iSCSI boot.

The TXMC391 supports IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping (with software extensions). The TXMC391-10R routes four Ethernet ports to the Back I/O P16 connector. All ports are mapped in the X12d range specified in VITA46.9 standard.

The SDP (Software Definable Pins) of each Ethernet Controller are connected to the Back I/O P16 connector for IEEE 1588 auxiliary device connections and LEDs on the board indicate the different network activities.

The TXMC391 has an I²C board temperature sensor to facilitate measurement of the board heat near the Primary Thermal Interface of the Conduction Cooled Frame.

The module meets the requirements to operate in extended temperature range from -40°C to +85°C (Card Edge Temperature).

Features

4x 1000BASE-KX Ethernet ports with Intel® I210IS controllers
IEEE 1588 / 802.1AS PTP support for precision time synchronization
IEEE 802.1Qav AVB support (with software extensions)
PXE & iSCSI boot supported via per-port flash memory
Fully compliant P16 backplane I/O (VITA 46.9 X12d mapping)
Extended temperature range: -40°C to +85°C (card edge)
Conduction-cooled (ANSI/VITA 20), ideal for rugged deployments
Onboard I²C temperature sensor for thermal monitoring

Ordering Options

Kontaktformular für Bestellanfragen hier

Manuf. Part No		Part Description
TXMC391-10R		4 Channel 1000BASE-KX Ethernet; P16 Back I/O (X12d); Conduction Cooled; IEEE 1588 auxiliary devices via Back I/O

+49 611 44889 400

info@systerra.de

Vetriebsbüros

Return to last Page ...