TPMC810
Add to Info-List

2-Channel Isolated CAN Bus PMC Module

The TPMC810 is a standard single-width 32 bit PMC with two independent CAN bus channels, isolated from system logic and from each other.

Two Philips SJA1000 CAN controllers (CAN specification 2.0B supported) are used.

CAN High Speed transceivers are used for the CAN bus I/O interface. An on board termination option (DIP switches) is provided for each CAN bus channel allowing to configure on board termination and pass through mode.

Each channel can generate an interrupt on INTA. Interrupts can be enabled and disabled separately.

The TPMC810 provides front panel I/O via two DB9 male connectors and rear panel I/O via P14.

Software support (TDRV010-SW-xx) for different operating systems is available.

Features
  • Standard single-width 32-bit PMC module conforming to IEEE P1386.1
  • 2 independent CAN bus channels
  • CAN specification 2.0B supported
  • On board termination can be configured
  • Front panel I/O (2 DB9 male connectors) and P14 I/O
Ordering Options
Manuf. Part No.  Product Description
TPMC810-10R  2 x isolated CAN Bus based on Philips SJA1000, ISO11898 Can Hig Speed, 2 x DB9 and P14 I/O: Two independent CAN Bus Controller based on SJA1000 supporting both, standard and extended frames according to CAN specification 2.0 part A and B; Physical interface optically isolated; CAN-HIGH-SPEED (ISO11898); Isolated against each other; DB-9 pol for each channel in front panel and P14 I/O; Two Independent Channel Extended CAN Bus Operating temperature -40°C to +8

Software and Documentation
Manuf. Part No.  Product Description
TPMC810-DOC  User Manual for TPMC810
TDRV010-SW-25  Integrity Software Support: Device driver; Source code; Programmer documentation
TDRV010-SW-42  VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation
TDRV010-SW-65  Windows Software Support: Device driver; Programmer documentation
TDRV010-SW-82  Linux Software Support: Device driver; Source code; Programmer documentation
TDRV010-SW-95  QNX Software Support: Device driver; Source code; Programmer documentation
For other operating systems please contact Systerra.

Accessories
Manuf. Part No.  Product Description
TPIM001  PIM I/O Module with 50 pin Connector: PIM I/O module used with any PIM carrier; I/O lines 1 to 50 routed to a HD50 SCSI-2 type connector in EMI front panel; Operating temperature -40°C...+85°C
Zubehör // Accessories to TOP
TPIM001

Tews 		TPIM001 PIM I/O Module with 50 pin Connector PIM I/O Module with 50-pin SCSI Connector
The TPIM001 is a standard single-width PIM I/O module to be used with any PIM carrier. It offers easy access to the PMC back I/O lines of PMC carrier with back I/O ... more
Return to last Page ...
Cookie Einstellungen
Diese Webseite verwendet ausschließlich notwendige Cookies, die für das Funktionieren von Login und Cookie-Hinweis unbedingt erforderlich sind. Statistik- und Werbe-Cookies kommen nicht zum Einsatz. Weitere Informationen finden Sie in unserer Datenschutzerklärung.
OK