The TPMC554 is a standard single-wide 32 bit PMC module and provides 32/16 channels of 16 bit analog outputs. All signals are accessible through a HD68 SCSI3 type front I/O connector.
The software selectable output voltage ranges are 0V-5V, 0V-10V, 0V-10.8V, ±5V, ±10V and ±10.8V. The output voltage range can be set individually per channel. The conversion time is typ. 10µs and the DAC outputs are capable to drive a load of 2kohm, with a capacitance up to 4000pF.
Besides of an individual channel update, the double buffered DACs allow simultaneous update of all channels. Additionally a sequencer on the TPMC554 allows updating enabled channels periodically with a sequence timer range that extends from 10µs to 11.93h.
In addition to the double buffered distributed RAM inside the FPGA the TPMC554 provides 2 M x 16 bit external SRAM to store values that are known in advance. This feature can also be used to periodically output any kind of waveform or bit pattern. The size of the FIFO for each DAC channel is adjustable.
Each TPMC554 is factory calibrated. The calibration information is stored in an on board serial EEPROM unique to each PMC module.
Software Support (TDRV016-SW-xx) is available for different operating systems.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- Board size: 149 mm x 74 mm
- Target Chip: PCI9030 (PLX Technology)
- PCI 2.1 compliant interface
- PCI I/O signaling voltage 5 V or 3.3 V
- 32/16 channels single-ended 16 bit analog output
- Programmable output voltage: 0...5 V, 0...10 V, 0...10.8 V, ±5 V, ±10 V, ±10.8 V
- Conversion time: typ.10 μs
- Up to 2 kΩ resistive, 4000 pF capacitive load
- Overcurrent protection
- Individual channel update, simultaneous update of all channels or sequencer mode
- 2 M x 16-bit SRAM to store voltage values
- Factory calibration data stored in EEPROM
- Operating temperature -40...+85°C
- MTBF (MIL-HDBK217F/FN2 GB 20°C):
TPMC554-10R: 665000 h
TPMC554-11R: 678000 h
Ordering Options
Manuf. Part No. | | Product Description |
TPMC554-10R | | 32 Channel 16 bit D/A with FIFOs, sequencer, simultan update, pgm. Vout, HD68: 32 channels of 16 bit D/A conversion; Settling time typ. 10 µs; Output ranges:+/- 10V, +/-5V, +/-10.8V, 0-10V, 0-5V, 0-10.8V software programmable per channel; FIFOs per channel (programmable size per channel, max 2 Mega samples) allow Waveform / Pattern generation; Support of individual or simultaneous channel update; Sequencer allows periodically update of enabled channels; Sequence Timer range from 10 µs to 11.93 h; Factory calibrated gain and offset; 68 pin SCSI-3 connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
TPMC554-11R | | 16 Channel 16 bit D/A with FIFOs, sequencer, simultan update, pgm. Vout, HD68: 16 channels of 16 bit D/A conversion; Settling time typ. 10 µs; Output ranges:+/- 10V, +/-5V, +/-10.8V, 0-10V, 0-5V, 0-10.8V software programmable per channel; FIFOs per channel (programmable size per channel, max 2 Mega samples) allow Waveform / Pattern generation; Support of individual or simultaneous channel update; Sequencer allows periodically update of enabled channels; Sequence Timer range from 10 µs to 11.93 h; Factory calibrated gain and offset; 68 pin SCSI-3 connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
Software and Documentation
Manuf. Part No. | | Product Description |
TPMC554-DOC | | User Manual for TPMC554 |
TDRV016-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
TDRV016-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
TDRV016-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
TDRV016-SW-72 | | LynxOS Software Support: LynxOS Device driver; Source code; Programmer documentation |
TDRV016-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
TDRV016-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
Manuf. Part No. | | Product Description |
TA104 | | HD68 Cable: 1.8 m cable with two 68 pin male SCSI-3 type connectors. The permissible maximum voltage for the TA104 is 30V DC. |
TA203 | | HD68 Terminal Block: 68 pin terminal block with 68 pin female SCSI-3 type connector |
TA304 | | Cable Kit for Modules with HD68 Connector: 1.8 m cable with two 68 pin male SCSI-3 type connectors; 68 pin terminal block with 68 pin female SCSI-3 connector. The permissible maximum voltage for the TA304 is 30V DC. |
TPIM002 | | PIM I/O Module with 68 pin Connector: PIM I/O module used with any PIM carrier; I/O lines routed to a HD68 SCSI-3 type connector in EMI front panel; Operating temperature -40°C...+85°C |
|