The TPMC553 is a standard single-wide 32 bit PMC module and provides 32/16 channels of 16 bit analog outputs. All signals are accessible through a HD68 SCSI3 type front I/O connector.
The software selectable output voltage ranges are 0-5V, 0-10V, 0-10.8V, ±5V, ±10V or ±10.8V. The output voltage range can be individually set per channel. The conversion time is typ. 10 µs and the DAC outputs are capable to drive a load of 2kohm, with a capacitance up to 4000pF.
Beside of an individual channel update, the double buffered DACs allow simultaneous update of all channels. Additionally a sequencer on the TPMC553 allows to periodically update enabled channels with a sequence timer range that extends from 10µs to 167s.
Each TPMC553 is factory calibrated. The calibration information is stored in an on board serial EEPROM unique to each PMC module.
Software Support (TDRV016-SW-xx) is available for different operating systems.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- 32 or 16 D/A channels
- 16 bit D/A converter
- Multiple software selectable output ranges (up to ±10.8 V)
- Supports simultaneous update
- Supports sequencer mode
- Channels are individually selectable
- Programmable cycle time (10 μs up to 167 s)
- Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (HD68 SCSI3 type connector)
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC553-10R | | 32 Channel 16 bit D/A, sequencer, simultan update, pgm. Vout, HD68: 32 channels of 16 bit D/A conversion; Settling time typ. 10 µs; Output ranges:+/- 10V, +/-5V, +/-10.8V, 0-10V, 0-5V, 0-10.8V software programmable per channel; Support of individual or simultaneous channel update; Sequencer allows periodically update of enabled channels; Sequence Timer range from 10 µs to 167 s; Factory calibrated gain and offset; 68 pin SCSI-3 connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
| TPMC553-11R | | 16 Channel 16 bit D/A, sequencer, simultan update, pgm. Vout, HD68: 16 channels of 16 bit D/A conversion; Settling time typ. 10 µs; Output ranges:+/- 10V, +/-5V, +/-10.8V, 0-10V, 0-5V, 0-10.8V software programmable per channel; Support of individual or simultaneous channel update; Sequencer allows periodically update of enabled channels; Sequence Timer range from 10 µs to 167 s; Factory calibrated gain and offset; 68 pin SCSI-3 connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC553-DOC | | User Manual for TPMC553 |
| TDRV016-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TDRV016-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TDRV016-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TDRV016-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TDRV016-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TA104 | | HD68 Cable: 1.8 m cable with two 68 pin male SCSI-3 type connectors. The permissible maximum voltage for the TA104 is 30V DC. |
| TA203 | | HD68 Terminal Block: 68 pin terminal block with 68 pin female SCSI-3 type connector |
| TA304 | | Cable Kit for Modules with HD68 Connector: 1.8 m cable with two 68 pin male SCSI-3 type connectors; 68 pin terminal block with 68 pin female SCSI-3 connector. The permissible maximum voltage for the TA304 is 30V DC. |
| TPIM002 | | PIM I/O Module with 68 pin Connector: PIM I/O module used with any PIM carrier; I/O lines routed to a HD68 SCSI-3 type connector in EMI front panel; Operating temperature -40°C...+85°C |
|
