The TPMC551 is a standard single-width 32-bit PMC module providing optically isolated 16-bit analog outputs.
The number of D/A channels and the I/O connector depends on the module version. Settling time to 0.003% is 10µs typical. Immediate and simultaneous loading are supported.
A sequencer allows periodical updates of enabled channels and the sequence timer range extends from 100µs to 6.5s.
The TPMC551 offers two output voltage ranges, ±10 V and 0-10V, which are selectable by solder pads. An on board DC/DC converter powers the isolated DAC and the output buffers.
Each TPMC551 is delivered factory calibrated. The calibration information is stored in the Calibration-PROM unique to each PMC module.
Software Support (TPMC551-SW-xx) is available for different operating systems.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386/P1386.1
- 8 or 4 D/A channels
- 16 bit D/A converter
- Channels are isolated
- Uni-polar (0 V … +10 V) or bi-polar (±10 V) output available
- Supports simultaneous load
- Supports sequencer mode
- Channels are individually selectable
- Programmable cycle time (100 μs up to 6.5535 s)
- Reduces CPU load
- Factory calibration data available in EEPROM
- Front panel I/O (DB25 female connector) or P14 I/O
Ordering Options
Manuf. Part No. | | Product Description |
TPMC551-10R | | 8 Channel Isolated 16 bit D/A, +/- 10V or 0-10V, DB25: 8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% is 10µs typical; +/-10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequencer Timer range from 100µs to 6.5s; Factory calibrated gain and offset; DC/DC converter on board; DB25 female connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
TPMC551-11R | | 4 Channel Isolated 16 bit D/A, +/- 10V or 0-10V, DB25: 4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% is 10µs typical; +/-10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequencer Timer range from 100µs to 6.5s; Factory calibrated gain and offset; DC/DC converter on board; DB25 female connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
TPMC551-20R | | 8 Channel Isolated 16 bit D/A, +/- 10V or 0-10V, P14 I/O: Same as TPMC551-10R but P14 I/O |
TPMC551-21R | | 4 Channel Isolated 16 bit D/A, +/- 10V or 0-10V, P14 I/O: Same as TPMC551-11R but P14 I/O |
Software and Documentation
Manuf. Part No. | | Product Description |
TPMC551-DOC | | User Manual for TPMC551 |
TPMC551-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
TPMC551-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
TPMC551-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
TPMC551-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
TPMC551-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
Manuf. Part No. | | Product Description |
TA103 | | DB25 M/M Cable: 1.8 m cable with two DB25 male connectors. The permissible maximum voltage for the TA103 is 30V DC. |
TA202 | | DB25 Terminal Block: 25 pin terminal block with DB25 female connector. The permissible maximum voltage for the TA202 is 30V DC. |
TA303 | | Cable Kit for Modules with DB25 Female Connector: 1.8 m cable with DB25 M/M connector; 25 pin terminal block with DB25 female connector. The permissible maximum voltage for the TA303 is 30V DC. |
TPIM001 | | PIM I/O Module with 50 pin Connector: PIM I/O module used with any PIM carrier; I/O lines 1 to 50 routed to a HD50 SCSI-2 type connector in EMI front panel; Operating temperature -40°C to +85°C |
|