The TPMC550 is a standard single-width 32 bit PMC module and provides 8 channels of isolated 12 bit analog outputs. 4 channel and rear-I/O order options are also available. The settling time to 0.012% is 10µs maximum.
The TPMC550 supports immediate and simultaneous load. The sequencer allows periodically update of enabled channels and the sequence timer range extends from 100µs to 6.5s.
The programmable output voltage range is +/-10V or 010V selectable by jumper. An on board DC/DC converter powers the isolated DAC and the output buffer.
Each TPMC550 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each PMC module.
Software Support (TPMC550-SW-xx) is available for different operating systems.
Features
- Standard single-width 32-bit PMC module conforming to IEEE P1386.1
- PCI 2.1 compliant interface
- 3.3V and 5V PCI Signaling Voltage
- Board size: 149 mm x 74 mm
- 8 or 4 channels of isolated 12-bit analog outputs
- Settling time to 0.012% is 10 μs maximum
- Full-scale output range +/- 10 V or 0...10 V
- Factory calibrated, calibration information stored in EEPROM
- Operating temperature -40°C...+85°C
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC550-10R | | 8 Channel Isolated 12 bit D/A, +/- 10V or 0-10V, DB25: 8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% is 10µs maximum; +/-10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequencer Timer range from 100µs to 6.5s; +/-10V inputs; Factory calibrated gain and offset; DC/DC converter on board; DB25 connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
| TPMC550-11R | | 4 Channel Isolated 12 bit D/A, +/- 10V or 0-10V, DB25: 4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% is 10µs maximum; +/-10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequencer Timer range from 100µs to 6.5s; +/-10V inputs; Factory calibrated gain and offset; DC/DC converter on board; DB25 female connector mounted in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C...+85°C |
| TPMC550-20R | | 8 Channel Isolated 12 bit D/A, +/- 10V or 0-10V, P14 I/O: Same as TPMC550-10R but P14 I/O |
| TPMC550-21R | | 4 Channel Isolated 12 bit D/A, +/- 10V or 0-10V, P14 I/O: Same as TPMC550-11R but P14 I/O |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC550-DOC | | User Manual for TPMC550 |
| TPMC550-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TPMC550-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TPMC550-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TPMC550-SW-72 | | LynxOS Software Support: LynxOS Device driver; Source code; Programmer documentation |
| TPMC550-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TPMC550-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TA103 | | DB25 M/M Cable: 1.8 m cable with two DB25 male connectors. The permissible maximum voltage for the TA103 is 30V DC. |
| TA202 | | DB25 Terminal Block: 25 pin terminal block with DB25 female connector. The permissible maximum voltage for the TA202 is 30V DC. |
| TA303 | | Cable Kit for Modules with DB25 Female Connector: 1.8 m cable with DB25 M/M connector; 25 pin terminal block with DB25 female connector. The permissible maximum voltage for the TA303 is 30V DC. |
| TPIM001 | | PIM I/O Module with 50 pin Connector: PIM I/O module used with any PIM carrier; I/O lines 1 to 50 routed to a HD50 SCSI-2 type connector in EMI front panel; Operating temperature -40°C to +85°C |
|
