Cookie Einstellungen
Diese Webseite verwendet ausschließlich notwendige Cookies, die für das Funktionieren von Login und Cookie-Hinweis unbedingt erforderlich sind. Statistik- und Werbe-Cookies kommen nicht zum Einsatz. Weitere Informationen finden Sie in unserer Datenschutzerklärung.
OK
TPMC533

32x ADC, 16x/0x DAC and 8x Digital I/O

The TPMC533 is a standard single-wide PCI Mezzanine Card (PMC) compatible module providing 32 channels of simultaneous sampling true differential bipolar 16bit analog input, 16 or no channels of simultaneous update single-ended unipolar/bipolar 16bit analog output and 8 channels of tri-state 5V-tolerant TTL digital input/output. All signals are accessible through a HDRA100 type front I/O connector. The PMC-Connectors P11 and P12 provide access to the control logic via a 32bit 33MHz PCI interface.

The ADCs offer true differential inputs with software selectable ±5V and ±10V bipolar input voltage ranges (one common setting for all eight channels of each ADC). The maximum sample rate of the ADCs is 200kSPS and they offer an oversampling capability with digital filter.

The DACs offer software selectable 0-5V, 0-10V, 0-10.8V, ±5V, ±10V and ±10.8V output voltage ranges (individual setting for each of the four channels of each DAC). The settling time is typically 10μs and the DAC channels are capable to drive a load of 2kΩ, with a capacitance up to 4000pF.

Each TPMC533 is factory calibrated. The correction data is stored in an on-board serial EEPROM unique to each PMC module. These correction values can be used to perform a hardware correction of every analog-to-digital and digital-to-analog conversion. Additionally, measurement data read out of a temperature sensor on-board can be used to compensate temperature dependent errors. The TPMC533 provides two Sequencers, one for AD Conversions and another one for DA Conversions. To perform periodic simultaneous conversions the conversion rates are programmable and can be output to other modules on PMC Back I/O Connector P14 or Front I/O Connector DIO pins for synchronization purposes. The TPMC533 can also operate as a target which means that the conversion rates can be sourced from P14 or Front I/O, created by another module.

A Frame Trigger signal, which can also either be generated by the TPMC533 and output on P14/Front I/O or generated by other modules and input from P14/Front I/O, can be used to synchronize ADC frames and DAC frames.

The signals on PMC Back I/O Connector P14 are ESD protected and driven or read by tri-state 5V-tolerant TTL buffers.
To be able to collect ADC frames and to output DAC frames the TPMC533 provides input and output FIFOs. Data transfer on the PCI bus is handled by TPMC533 initiated block transfer mode DMA cycles with minimum host/CPU intervention.

The 8 Digital TTL tri-state I/O lines with 4.7kΩ pull resistors are ESD protected. The voltage, the pull resistors are connected to, is programmable by software and can be 3.3V, 5V, GND or floating level (one common setting for all eight Digital I/Os).

All 8 DIOs can be programmed whether to have their Digital I/O transmitters enabled or disabled individually per I/O line. The Digital I/O receivers are always enabled, so each DIO level can always be monitored and can generate an interrupt, triggered on rising edge, falling edge or both. Additionally, a debounce filter can be configured to get rid of bounce on the Digital I/O lines. Features
  • Standard single-width 32-bit PMC module conforming to IEEE P1386/P1386.1
    - Board size: 149 mm x 74 mm
    - 32bit / 33MHz PCI
    - DMA Master functionality
  • 32 channels of simultaneous sampling true differential bipolar 16bit analog input
    - Input voltage ranges: ±5V and ±10V
    - Maximum sample rate: 200kSPS
    - Oversampling capability
  • 16 or no channels of simultaneous update single-ended unipolar/bipolar 16bit analog output
    - Output voltage ranges: 0-5V, 0-10V, 0-10.8V, ±5V, ±10V and ±10.8V
    - Settling time: typ. 10μs
    - load of 2kΩ with a capacitance up to 4000pF
  • Hardware Correction
    - Factory calibrated
  • Temperature Sensor on-board
  • Programmable conversion rates
    - Can be output to other modules
    - Can be input from other modules
  • Frame Trigger signal for synchronization purposes
  • 8 channels of tri-state 5V-tolerant TTL digital input/output
    - ESD protection
  • HDRA100 type front I/O connector
  • Operating temperature -40°C...+85°C
  • MTBF (MIL-HDBK217F/FN2 GB 20°C)
    - TPMC533-10R: 487000 h
    - TPMC533-20R: 497000 h
Ordering Options
Manuf. Part No.  Product Description
TPMC533-10R  32 Channels of Simultaneous Sampling Differential 16 bit A/D, 16 Channels of Simultaneous Update Single-Ended 16 bit D/A and 8 Channels of TTL Digital I/O, with HDRA100 front panel I/O
TPMC533-20R  32 Channels of Simultaneous Sampling Differential 16 bit A/D and 8 Channels of TTL Digital I/O, with HDRA100 front panel I/O

Software and Documentation
Manuf. Part No.  Product Description
TPMC533-DOC  User Manual for TPMC533
TDRV019-SW-25  Integrity Software Support
TDRV019-SW-42  VxWorks Software Support (Legacy and VxBus-Enabled Software Support)
TDRV019-SW-65  Windows Software Support
TDRV019-SW-82  Linux Software Support
TDRV019-SW-95  QNX Software Support
For other operating systems please contact systerra.

Accessories
Manuf. Part No.  Product Description
TA114  1.2 m Cable with one male HDRA100 Connector and two male HD50 Connectors
TA201  HD50 Terminal Block
TA313  Cable Kit for Modules with HDRA100 Connector
Zubehör // Accessories to TOP
TA201

Tews
TA201-10 50-pin Terminal Block 50-pin Terminal Block with 50-pin female SCSI-2 type Connector
The TA201 is used as a standard interface for a switch cabinet to connect a lot of TEWS modules with other system devices. The HD50 Terminal Block is therefore an essential wiring interface for prototyping and in the same way for machine and peripheral equipment ... more
Return to last Page ...