The TPMC363 is a conduction cooled single-width 32 bit PMC with four high speed serial data communication channels. The TPMC363 is the successor of the discontinued TPMC362, providing similar functionality and full connector and pin-out compatibility.
The serial communication controller is implemented in FPGA logic, along with the bus master capable PCI interface, guaranteeing long term availability and having the option to implement additional functions in the future. Each channel provides dedicated receive and transmit FIFOs for high data throughput. Data transfer on the PCI bus is handled via TPMC363 initiated DMA cycles with minimum host/CPU intervention.
Several serial communication protocols are supported by each channel, such as asynchronous, isochronous, synchronous and HDLC mode. A 14.7456 MHz oscillator provides standard asynchronous baud rates. An additional 24 MHz oscillator is provided for other baud rates. A 10 MHz oscillator is used for the synchronous baud rate of 10 Mbit/s.
Each channel also provides various interrupt sources, generated on INTA. The interrupt sources can be enabled or disabled individually. Multiprotocol transceivers are used for the line interface. The physical interface is selectable by software, individually for each channel as EIA-232, EIA-422, EIA449, EIA-530, EIA-530A, V.35, V.36 or X.21.
The following signals are provided by the TPMC363 for each channel at the front and rear-I/O connectors: Receive Data (RxD +/-), Transmit Data (TxD +/-), Receive Clock (RxC +/-), Transmit Clock (TxC +/-), Ready-To-Send (RTS +/-), Clear-To-Send (CTS +/-), Carrier-Detect (CD +/-) and GND.
The TPMC363 provides rear panel I/O via P14.
Software Support (TDRV009-SW-xx) for different operating systems is available.
Features
- Conduction cooled single-width 32 bit PMC module
- 4 channels high speed serial data communication
- A wide range of I/O interfaces individually programmable for each channel
- Several communication protocols
- asynchronous (with oversampling)
- isochronous
- HDLC
- 512 longword FIFO (512 x 32 bit) per channel
- DMA support
- Different signal encodings (NRZ, NRZI, FM0, FM1 and Manchester)
- Multiple clock sources (for a wide bitrate spectrum)
- Rear I/O via P14
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC363-10R | | ccPMC, 4 Channel High Speed Synch/Asynch Serial Interface, P14 I/O: Conduction Cooled PMC: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°CC |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC363-DOC | | User Manual for TPMC363 |
| TDRV009-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TDRV009-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TDRV009-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TDRV009-SW-72 | | LynxOS Software Support: LynxOS Device driver; Source code; Programmer documentation |
| TDRV009-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TDRV009-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TPIM005 | | PIM I/O Module with HD68 SCSI-3 type connector: PIM I/O module for TPMC863, TPMC363; maps all 64 I/O lines of the PMC P14 I/O connector to a 68 pin SCSI-3 type connector resulting in the same pin assignment as the 68 pin SCSI-3 type connector used on the PMC; Operating temperature -40°C to +85°C |
|
