The SD4-SWEEP is a peripheral slot card for CompactPCI® Serial systems, equipped with a quad-channel PCI Express® to SATA 6Gbps controller, and four on-board sockets for M.2 solid state drives (SSD). available of 512MB as of current, M.2 is a fast emerging embedded storage module form factor. The Marvell® SATA 3.0 controller allows RAID or non RAID operation.
The SD4-SWEEP fits into any CompactPCI® Serial peripheral slot that is PCIe enabled. For optimum performance a fat pipe slot may be chosen. Hardware RAID operation is supported, running with an enhanced ARM-based processor to offload the host CPU. Thanks to the four M.2 sockets provided on the SD4-SWEEP, a JBOD or hardware RAID level 0/1/10 system can be easily configured.
Features
- PICMG® CompactPCI® Serial Standard (CPCI-S.0)
- Single size Eurocard 3U 4HP 100x160mm2
- Suitable for CompactPCI® Serial peripheral slot (PCI Express® enabled)
- CompactPCI® Serial fat pipe slot (PCIe x 8) or peripheral slot (PCIe x 4) recommended
- cPCI-S backplane connector P1 for PCI Express®, single or dual lane link
- Marvell® PCI Express® 2.0 to SATA III host controller
- Four SATA 6Gbps interface ports (backward support 3Gbps and 1.5Gbps)
- Native Command Queuing
- Hardware RAID 0/1/10
- On-the-fly AES encryption 128/256-bit
- AHCI driver support
- Marvell HyperDuo technology for automated SSD/HDD tiering
- Designed according to PCI Express® M.2 Specification (aka NGFF)
- Up to four on-board M.2 SSD modules (must be ordered separately)
- M.2 module size 2280, 2260, 2242, typically B-M coded
- M.2 host connectors B-coded, 4.2H (accepts double-sided modules)
- Socket 2 pin-out for SATA based SSDs (configuration pins 0000)
- Various brands of M.2 SSDs available (e.g. Intel, Micron, Samsung)
- Hardware RAID option for dual or triple/quad device configuration
Ordering Options
| Manuf. Part No | | Part Description |
| SD4-0100-SWEEP | | 4 x M.2 SATA module sockets (B key, 4.2H), for M.2 2230/2242/2260/2280-D5/S3 SSD modules on-board SATA 6G hardware RAID controller |
|
