SC4-CONCERTO

CompactPCI® Serial CPU Card with Intel® XEON® E3 v5 or 6th Generation Intel® Core™ Processor

The SC4-CONCERTO is a rich featured high performance 4HP/3U CompactPCI® Serial CPU board, equipped with an Intel® Xeon® E3 familiy mobile workstation processor (Skylake Halo platform) for demanding applications. For scalability, the SC4-CONCERTO is also available with a 6th Generation Intel® Core™ Skylake processor.

The SC4-CONCERTO front panel is provided with two Gigabit Ethernet jacks, two USB 3.0 receptacles, and two DisplayPort connectors. In addition, up to two USB Type-C front panel receptacles are available as an option, one of them usable alternatively as (third) DisplayPort.

On-board mass-storage solutions are based on a low profile mezzanine expansion card, which accommodates two M.2 style SSD modules. One of the M.2 sockets is suitable for a fast NVMe (PCIe Gen3 x 4) module, and the other for a low cost SATA type M.2 SSD.

The SC4-CONCERTO is equipped with up to 32GB DDR4 RAM with ECC support. Up to 16GB memory-down are provided for rugged applications, and another 16GB are available via the DDR4 ECC SO-DIMM socket.

The powerful Xeon® E3-1500 v5 series processor is accompanied by the CM238 mobile PCH, for a maximum of high speed I/O resources (e.g. PCI Express®, SATA, USB). Thus, 22 PCIe lanes are available for backplane use, and up to 8 lanes for local mezzanine expansion.

The SC4-CONCERTO is provided with an on-board SATA hardware RAID controller, enabling high-capacity mass storage solutions across the CompactPCI® Serial backplane.

As an option, up to eight Gigabit Ethernet Ports are available via the backplane connector P6 (low profile mezzanine expansion card).

The SC4-CONCERTO is equipped with a set of high-speed local expansion interface connectors, which can be optionally used to attach either a low profile mezzanine module (fits into the 4HP front panel envelope) or a side board for an 8HP or even 12HP assembly in total.

The connectors HSE1 and HSE2 are high speed connectors, as required for PCI Express® Gen3 and SATA 6G. The socket EXP is used as a legacy interface (e.g. HD Audio, LPC) and not required for many mezzanine modules. All connectors allow board-to-board heights of 9.5mm (C4* series, S20, S40), 10.8mm (S60, S80), and 18.7mm (SC* side cards 8HP assembly).

HSE1 can be configured for either 4 x PCIe or 4 x SATA, or 2 x PCIe and 2 x SATA, thanks to the flexible HSIO channels of the CM238 PCH. When HSE1 has been setup for SATA, the SC4-CONCERTO can be combined e.g. with low cost SSD mass storage mezzanine modules such as the C47-MSATA (dual mSATA carrier) or C48-M2 (dual M.2 SATA sockets). For high performance NVMe based SSD mezzanine modules (S20/40/60) HSE1 must be configured as PCIe x 4.

HSE2 is assigned to 4 x PCIe, and in addition the 3rd DisplayPort video output. While S20 and S60 get along with HSE1 only, the S40 and S80 mezzanine modules depend on both HSE1 and HSE2, for additional I/O.

Features

CompactPCI® Serial (PICMG® CPCI-S.0) CPU card
Form factor single size Eurocard (board dimensions 100x160mm2)
Mounting height 3U
Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit Ethernet
Local mezzanine expansion option, COTS and custom specific boards

Ordering Options

Manuf. Part No

Part Description

Please contact systerra for Ordering Options

Expansion Options

Manuf. Part No		Part Description
P-EXP		Legacy interface (from PCH)
P-HSE1		configurable as 4 x SATA 6G or 4 x PCIe (from CM238 PCH), 1 x USB3
P-HSE2		4 x PCIe (from CM238 PCH) & 3rd DisplayPort (from CPU)

Mezzanine Expansion Options

Manuf. Part No		Part Description
C32-FIO		Front Panel I/O Expansion Board
C41-CFAST		Low Profile Mezzanine Module: CFast™ Flash Card Adapter, SATA, USB SSD
C42-SATA		Low Profile Mezzanine Module: 1.8-Inch Micro SATA Solid State Drive (SSD)
C43-SATA		Low Profile Mezzanine Module: SATA Connectors, USB Connectors, USB SSD
C44-SATA		Expansion Side Board: 2.5-Inch SATA Hard Disk or Solid State Drive (SSD), eSATA & USB F/P
C45-SATA		Expansion Side Board: 1.8-Inch Micro SATA Solid State Drive (SSD), eSATA & USB F/P; LAST PURCHASE DATE: jan 15, 2021
C47-MSATA		Low Profile Mezzanine Module: Dual mSATA SSD Sockets (RAID Option)
C48-M2		Low Profile Mezzanine Module: Dual M.2 SSD Sockets (formerly known as NGFF)
S20-NVME		Low Profile Mezzanine Module: 1 x M.2 2280 NVME SSD socket, 1 x Type-C USB F/P connector
S40-NVME		Low Profile Mezzanine Module: 1 x M.2 2280 NVME SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x Type-C USB F/P Connector (1 connector enabled for DisplayPort alternate mode)
S42-MC		Low Profile Mezzanine Module: M.2 NVMe or SATA SSD Storage, PCI Express® Mini Card Sockets
S80-P6		Low Profile Mezzanine Module: 1 x M.2 2280 NVMe SSD socket, 8 x Gigabit Ethernet via P6 backplane connector (TSN/AVB switch based solution)
S82-P6		Low Profile Mezzanine Module: M.2 NVMe SSD Storage, Backplane Gigabit Ethernet NICs
SCL-RHYTHM		Expansion Side Board: Quad port GbE NIC, front panel M12 X-coded receptacles, dual M.2 (NVMe/SATA) SSD
SCZ-NVM		Expansion Side Board: Dual M.2 NVMe SSD, quad UART

+49(0)611 44889 400

info@systerra.de

Vetriebsbüros

Zubehör // Accessories
C41-CFAST EKF		Internal USB/SATA Connectors Low Profile Mezzanine Module Available as a mezzanine add-on expansion board to the CCM-BOOGIE and successor CPU carrier cards, the main purpose of the C41-CFAST is to provide a CFast™ host connector for attachment of a CFast™ storage card, as a rugged and fast mass storage media, which can be easy replaced. The C41-CFAST is designed to fit into the 4HP (20.32mm pitch) envelope of a CPCI CPU carrier board.... more
C44-SATA EKF		2.5-Inch SATA SSD/HDD Mezzanine Storage Module Available as a mezzanine add-on expansion board to several EKF CPU carrier cards, the main purpose of the C44-SATA is to accommodate a 2.5-inch SATA drive, either SSD (Solid State Drive) or HDD (Hard Disk Drive). In addition, the C44-SATA provides eSATA and USB connectors for front panel I/O... more
C47-MSATA EKF		Dual mSATA Card Low Profile Mezzanine Storage Module Available as a mezzanine add-on expansion board to the CCM-BOOGIE, PC1-GROOVE and other CPU carrier cards, the main purpose of the C47-MSATA is to provide dual host connectors for mounting of mSATA SSD modules, as a rugged and fast mass storage media... more
C48-M2 EKF		Dual M.2 SATA SSD Low Profile Mezzanine Storage Module Available as a mezzanine add-on expansion board e.g. to the PC6- or SC6-TANGO and other CPU carrier cards, the C48-M2 provides host connectors for mounting of two M.2 SATA SSD modules, as a rugged and fast mass storage media... more
S20-NVME EKF		Low Profile Mezzanine for CompactPCI® Serial CPU Cards: M.2 NVMe SSD Storage, USB Type-C Front I/O Available as a mezzanine add-on expansion board e.g. to the SC4-CONCERTO and successor CPU carrier cards, the main purpose of the S20-NVME is to provide a mass storage solution... more
S40-NVME EKF		Low Profile Mezzanine for CompactPCI® Serial CPU Cards: M.2 NVMe and SATA SSD Storage Available as a mezzanine add-on expansion board e.g. to the SC4-CONCERTO and successor CPU carrier cards, the main purpose of the S40-NVME is to provide a mass storage solution, by means of one or two M.2 SSD modules... more
S42-MC EKF		Low Profile Mezzanine for CompactPCI® Serial CPU Cards: M.2 NVMe or SATA SSD Storage, PCI Express® Mini Card Sockets The S42-MC is a low profile mezzanine module for EKF CompactPCI® Serial CPU boards. It can accommodate either two PCI Express® Half-Mini Cards, or one Full-Mini Card (PCIe® Gen3 and USB 2.0)... more
S80-P6 EKF		Low Profile Mezzanine for CompactPCI® Serial CPU Cards: M.2 NVMe SSD Storage, 8-Port Gigabit Ethernet Backplane Support Available as a mezzanine add-on expansion board e.g. to the SC4-CONCERTO and successor CPU carrier cards, the main purpose of the S80-P6 is to provide a Solid State Drive mass storage solution, and in addition to supply the backplane with eight Gigabit Ethernet ports... more
S82-P6 EKF		Low Profile Mezzanine for CompactPCI® Serial CPU Cards: M.2 SSD (NVMe PCIe x4 Gen3), 4 x Gigabit Ethernet NICs for IP over Backplane (Star/Mesh) Available as a mezzanine add-on expansion board e.g. to the SC4-CONCERTO and successor CPU carrier cards, the main purpose of the S82-P6 is to provide a Solid State Drive mass storage solution, and in addition to supply the backplane with four Gigabit Ethernet ports... more
SCL-RHYTHM EKF		Mezzanine CPU Side Card M.2 NVMe & Quad M12-X Gigabit Ethernet The SCL-RHYTHM is a mezzanine side card for EKF CPU boards, provided with a socket for a PCI Express® based M.2 mass storage module, and four independent Gigabit Ethernet controllers for universal networking... more
SCZ-NVM EKF		Mezzanine CPU Side Card, M.2 NVMe SSD, Front I/O Available as a mezzanine add-on expansion board (aka side card) e.g. for the SC5-FESTIVAL CompactPCI® Serial CPU, the SCZ-NVM is equipped with two M.2 NVMe type SSD module sockets, as a rugged mass storage solution. In addition, frequently required I/O functions (RS-232, USB 3.0, DisplayPort) are provided via front panel connectors... more

Return to last Page ...