Cookie Einstellungen
Diese Webseite verwendet ausschließlich notwendige Cookies, die für das Funktionieren von Login und Cookie-Hinweis unbedingt erforderlich sind. Statistik- und Werbe-Cookies kommen nicht zum Einsatz. Weitere Informationen finden Sie in unserer Datenschutzerklärung.
OK
SA4-COUNTRY

PCI Express® Card Adapter and Carrier for PCIe® x8

The SA4-COUNTRY is a peripheral slot board for PICMG® CompactPCI® Serial systems and acts as carrier for a low profile PCI Express® Card. The SA4-COUNTRY is provided with a PCIe x8 connector (option x4, x1) and accommodates a PCIe® card with maximum dimensions of up to 176mm (length) x 68.9mm (height). Covered by a metallic shell, the PCI Express® Card protrudes slightly from the front panel, for optimum board space utilization.

The SA4-COUNTRY is equipped with the backplane connectors P1/P2 for support of up to eight PCI Express® lanes when inserted into a CompactPCI® Serial fat pipe slot. For the x1 or x4 options, only P1 is required. For optimum signal integrity, PCI Express® Gen3 redrivers are provided on-board, and also a clock buffer. As an option, a 50mm axial fan can be mounted at the SA4-COUNTRY bottom side, for a forced air flow under a demanding PCIe® card.

Features
  • PICMG® CompactPCI® Serial Standard (CPCI-S.0)
  • Single Size Eurocard 3U 8HP 100x160mm2, assembly extension through front panel (metal cap 13.5mm)
  • Actual front panel width may vary depending on customers special needs for system integration and the particular PCI Express® Card in use
  • Suitable for CompactPCI® Serial peripheral slot (PCI Express® enabled)
  • CompactPCI® Serial fat pipe slot PCIe x8 or at least peripheral slot PCIe x4 recommended
  • CompactPCI® Serial backplane connectors P1 & P2 for PCI Express® x8
  • CompactPCI® Serial backplane connector P1 for PCI Express® x4
PCI Express® Card
  • Carrier board for limited size (short profile) PCI Express® Card
  • Maximum card dimensions 176.0mm x 68.9mm
  • Die cast hood on the SA4-COUNTRY front panel covers PCI Express® card bracket
  • Up to 70W power support via PCI Express® card connector (+3.3V/3A, +12V/5.5A)
  • PCI Express® Connector x 1 (SA4-0100-COUNTRY)
  • PCI Express® Connector x 4 (SA4-0400-COUNTRY)
  • PCI Express® Connector x 8 (SA4-0800-COUNTRY)
  • PCI Express® Clock Buffer on-Board
  • PCI Express® Gen3 redrivers on-board
  • Opening in the SA4-COUNTRY PCB for a 50mm Papst axial fan (optional bottom side mounting), for forced rear side airflow under the PCI Express® Card (heat dissipation enhancement)
Applications
  • Easy system integration of special functions not yet available as CompactPCI® Serial board
  • System integration of proprietary hard- and software
  • Integration of 3rd party IP e.g. FPGA based solutions with proprietary software
  • Rapid solution for prototyping systems and small to medium volume applications
Compliance Tested
  • Bittware • Intel Altera Arria 10 FPGA
  • Nallatech • Intel Altera Arria 10 FPGA
  • Reflex CES • Intel Altera Arria 10 FPGA
  • Projected: Reflex CES • Intel Altera Arria 5 FPGA
Environment & Regulation
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Long term availability
  • Rugged solution (coating/sealing available on request)
  • RoHS compliant
  • Operation temperature 0...+70°C (commercial temperature range)
  • Operating temperature: -40...+85°C (industrial temperature range)
  • Storage temperature: -40...+85°C, max. gradient 5°C/min
  • Humidity 5%...95% RH non condensing
  • Altitude -300m...+3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF 75.1 years
  • EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
Please refer to the attached Datasheet for more information
Ordering Options
Manuf. Part No.  Product Description
SA4-0800-COUNTRY  Low profile half height PCI Express card carrier, increased card dimensions, front panel front extension, PCIe Gen 3 x8 connection
Return to last Page ...