NPort® 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort® 5600-8-DT device servers have a smaller form factor compared to our 19" models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.
Convenient Design for RS-485 Applications
The NPort 5650-8-DT device servers support selectable 1 KΩ and 150 KΩ pull high/low resistors and a 120 Ω terminator. In some critical
environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is
also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.
Convenient Power Inputs
The NPort 5650-8-DT device servers support both power terminal blocks and power jacks for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adapter.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and
help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Two Ethernet Ports for Convenient Cascade Wiring
The NPort 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.
Features
- 8 serial ports supporting RS-232/422/485
- Compact desktop design
- 10/100M auto-detecting Ethernet
- Easy IP address configuration with LCD panel
- Configure by Telnet, web browser, or Windows utility
- Socket modes: TCP server, TCP client, UDP, Real COM
- SNMP MIB-II for network management
- Standards and Certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A
- Safety: UL 60950-1, IEC 62368-1
- 5 Years Warranty
Ordering Options
Modelname | | Serial Interface | | Serial Interface Connector | | Serial Interface Isolation | | Operating Temp. | | Power Adapter Included in Package | | Input Voltage | |
NPort 5610-8-DT | | RS-232 | | DB9 | | – | | 0 to 55°C | | Yes | | 12 to 48 VDC |
|
NPort 5610-8-DT-T | | RS-232 | | DB9 | | – | | -40 to 75°C | | No | | 12 to 48 VDC |
|
NPort 5610-8-DT-J | | RS-232 | | 8-pin RJ45 | | – | | 0 to 55°C | | Yes | | 12 to 48 VDC |
|
NPort 5650-8-DT | | RS-232/422/485 | | DB9 | | – | | 0 to 55°C | | Yes | | 12 to 48 VDC |
|
NPort 5650-8-DT-T | | RS-232/422/485 | | DB9 | | – | | -40 to 75°C | | No | | 12 to 48 VDC |
|
NPort 5650-8-DT-J | | RS-232/422/485 | | 8-pin RJ45 | | – | | 0 to 55°C | | Yes | | 12 to 48 VDC |
|
NPort 5650I-8-DT | | RS-232/422/485 | | DB9 | | 2 kV | | 0 to 55°C | | Yes | | 12 to 48 VDC |
|
NPort 5650I-8-DT-T | | RS-232/422/485 | | DB9 | | 2 kV | | -40 to 75°C | | No | | 12 to 48 VDC |
|
Power Adaptors
Manuf. Part No | | Part Description | |
PWR-12300-WPEU-S2 | | Locking barrel plug, 12 VDC, 3 A, 100 to 240 VAC, Continental Europe (EU) plug, 0 to 40°C operating temperature |
|
DIN-Rail Mounting Kit
Manuf. Part No | | Part Description | |
DK35A | | DIN-Rail Mounting Kit (35 mm) |
|
WK-35-04 | | Wall-mount kit with 2 plates, 6 screws |
|
|