NPort® 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available.
Convenient Design for RS-485 Applications
The NPort® 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.
Features
- 8 serial ports supporting RS-232/422/485
- Compact desktop design
- 10/100M auto-sensing Ethernet
- Configure by Telnet, web browser, or Windows utility
- Supports Real COM and TCP server, TCP client, UDP socket modes
- SNMP MIB-II for network management
- Standards and Certifications
- EMC: EN 55032/24
- EMI: CISPR 32, FCC Part 15B Class A
- Safety: UL 60950-1
- 5 Years Warranty
Recommended replacement: NPort 5600-8-DT
Ordering Options
| Model Name | | Serial Interface | | Serial Interface Connector | | Serial Interface Isolation | | Operating Temp. | | Input Voltage | |
| NPort 5610-8-DTL | | RS-232 | | DB9 | | – | | 0 to 60°C | | 12-48 VDC |
|
| NPort 5610-8-DTL-T | | RS-232 | | DB9 | | – | | -40 to 75°C | | 12-48 VDC |
|
| NPort 5650-8-DTL | | RS-232/422/485 | | DB9 | | – | | 0 to 60°C | | 12-48 VDC |
|
| NPort 5650-8-DTL-T | | RS-232/422/485 | | DB9 | | – | | -40 to 75°C | | 12-48 VDC |
|
| NPort 5650I-8-DTL | | RS-232/422/485 | | DB9 | | 2 kV | | 0 to 60°C | | 12-48 VDC |
|
| NPort 5650I-8-DTL-T | | RS-232/422/485 | | DB9 | | 2 kV | | -40 to 75°C | | 12-48 VDC |
|
Optional Accessories
| Manuf. Part No | | Part Description | |
| PWR-12200-DT-S1 | | Desktop power supply (requires power cord), 12 VDC 2 A, 100-240 VAC, 0...+40°C operating temperature |
|
| PWC-C13EU-3B-183 | | Power cord with Continental Europe (EU) plug, 1.83 m |
|
| DK-35A | | DIN-rail mounting kit |
|
| WK-35-04 | | Wall-mounting kit, 2 plates with 6 screws |
|
| ADP-RJ458P-DB9F | | DB9 female to RJ45 connector |
|
| Mini DB9F-to-TB | | DB9 female to terminal block adapter for RS-422/485 applications |
|
|
