NPort® 5400 device servers provide many useful features for serial-to-Ethernet applications, including an independent operation mode for each serial port, user-friendly LCD panel for easy installation, dual DC power inputs, and adjustable termination and pull high/low resistors.
Network-Readiness for up to four Serial Devices
The NPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.
Independent Operation Mode for each Serial Port
NPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.
Features
- User-friendly LCD panel for easy installation
- Adjustable termination and pull high/low resistors
- Socket modes: TCP server, TCP client, UDP
- Configure by Telnet, web browser, or Windows utility
- SNMP MIB-II for network management
- 2 kV isolation protection for NPort 5430I/5450I/5450I-T
- -40...+75°C operating temperature range (-T model)
- Standards & certifications
- EMC: EN 55032/24
- EMI: CISPR 32, FCC Part 15B Class A
- Marine: DNV
- Medical: EN 60601-1-2 Class B, EN 55011 (NPort 5410/5450/5450I only)
- Safety: UL 60950-1
- 5 Years Warranty
Ordering Options
| Manufacturer's Part No | | Part Description | |
| NPort 5410 | | 4-Port RS-232 Serial Device Server, operating temperature 0...+55°C (32 to 131°F) |
|
| NPort 5430 | | 4-port RS-422/485 device server |
|
| NPort 5430I | | 4-port RS-422/485 device server with 2 KV isolation protection |
|
| NPort 5450 | | 4-port RS-232/422/485 device server |
|
| NPort 5450-T | | 4-port RS-232/422/485 device server, -40...+75°C operating temperature (without LCM) |
|
| NPort 5450I | | 4-port RS-232/422/485 device server with 2 KV isolation protection |
|
| NPort 5450I-T | | 4-port RS-232/422/485 device server with 2KV isolation protection, -40...+75°C operating temperature (without LCM) |
|
Accessories
| Manufacturer's Part No | | Part Description | |
| DK35A | | DIN-Rail Mounting Kit (35 mm) |
|
| ADP-RJ458P-DB9F | | DB9 female to RJ45 connector |
|
| Mini DB9F-to-TB | | DB9 Female to Terminal Block connector |
|
| CBL-F9M9-150 | | DB9 female to DB9 male serial cable, 1.5 m |
|
| CBL-F9M9-20 | | DB9 female to DB9 male serial cable, 20 cm |
|
| CBL-RJ458P-100 | | 8-pin RJ45 CAT5 Ethernet cable, 1 m |
|
| CBL-RJ45SF9-150 | | RJ45 to DB9 female serial shielded cable, 1.5 m |
|
Power Options (please see Datasheet for compatibility)
| Manufacturer's Part No | | Part Description | |
| PWR-12150-WPEU-S2 | | Non-Locking Barrel Plug, 12 VDC 1.25/1.5 A, 100..240 VAC |
|
| CBL-PJTB-10 | | Non-locking barrel plug to bare-wire cable |
|
|
