The MGate 5118 series industrial protocol gateways support the SAE J1939 protocol, which is based on CANBus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.
The MGate 5118 series gateways support the Modbus RTU/ASCII/ TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.
Features
- Converts J1939 to Modbus, PROFINET, or EtherNet/IP
- Supports Modbus RTU/ASCII/TCP master/client and slave/server
- Supports EtherNet/IP Adapter
- Supports PROFINET IO device
- Supports J1939 protocol
- Effortless configuration via web-based wizard
- Built-in Ethernet cascading for easy wiring
- Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis
- microSD card for configuration backup/duplication and event logs and data buffering when cloud connection is lost
- Status monitoring and fault protection for easy maintenance
- CAN bus and serial port with 2 kV isolation protection
- -40...+75°C wide operating temperature models available
- Standards and Certifications:
- Safety: EN 60950-1, UL 61010-2-201
- EMC: EN 61000-6-2/-6-4
- EMI: CISPR 32, FCC Part 15B Class A
- Hazardous Locations: ATEX, Class I Division 2, IECEx
- Freefall: IEC 60068-2-32
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6, IEC 60068-2-64
- 5 Years Warranty
Ordering Options
| Manuf. Part No | | Part Description | |
| MGate 5118 | | 1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, 0...+60°C operating temperature |
|
| MGate 5118-T | | 1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, -40...+75°C operating temperature |
|
Optional Accessories
| Manuf. Part No | | Part Description | |
| CBL-F9M9-150 | | DB9 female to DB9 male serial cable, 150 cm |
|
| CBL-F9M9-20 | | DB9 female to DB9 male serial cable, 20 cm |
|
| CBL-RJ45F9-150 | | RJ45 to DB9 female serial cable, 1.5 m |
|
| CBL-RJ45SF9-150 | | RJ45 to DB9 female serial shielded cable, 1.5 m |
|
| CBL-PJTB-10 | | Non-locking barrel plug to bare-wire cable |
|
| WK-51-01 | | Wall mounting kit |
|
| Mini DB9F-to-TB | | DB9 female to terminal block adapter |
|
|
