MGate 5109 Series

1-port Modbus RTU/ASCII/TCP-to-DNP3 serial/TCP/UDP gateways

Overview
The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP protocol conversion. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer built-in serial isolation. The MGate 5109 supports transparent mode for easily integrating Modbus TCP to Modbus RTU/ASCII networks or DNP3 TCP/UDP to DNP3 serial networks. The MGate 5109 series gateways support Modbus and DNP3 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave ID and register address, 5109 also support agent mode to exchange data between Modbus and DNP3 networks or to act as a data concentrator for multiple Modbus slaves or multiple DNP3 outstations. The rugged design is suitable for industrial applications such as power, oil & gas, and water and wastewater.

Easy Configuration via Web Console
The MGate 5109 series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5109 series also supports Auto Detection for DNP3 serial outstations, allowing the MGate 5109 to automatically acquire all outstation objects when configured as a DNP3 master.

Variety of Maintenance Functions
The MGate 5109 series gateway provides a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, firmware log functions are provided to record connection events and Modbus maintenance events. Users can review log data remotely through the web console.

Features
  • Supports Modbus master/slave and DNP3 master/outstation
  • Up to 31 Modbus serial slaves or DNP3 serial outstations
  • Up to 32 Modbus TCP slaves or DNP3 TCP/UDP outstations
  • Supports DNP 3.0 subset level 2
  • DNP3 master mode supports up to 26600 points
  • DNP3 master and outstation modes support time-synchronization
  • Complete diagnosis information for maintenance
  • Embedded Modbus and DNP3 serial traffic monitor
  • Redundant dual DC power inputs and relay output
  • microSD card for configuration backup and system log
  • -40...75°C wide operating temperature models available
  • Serial port with 2 kV built-in isolation protection
  • Built-in Ethernet cascading for easy wiring
  • Security features based on IEC-62443
  • Hazardous Location: Class 1 Division 2, ATEX, IECEx
  • 5 Years Warranty
Ordering Options
Manuf. Part No    Part Description
MGate 5109  1-port Modbus-to-DNP3 gateway, 0...+60°C operating temperature
MGate 5109-T  1-port Modbus-to-DNP3 gateway, -40...+75°C operating temperature

Optional Accessories
Manuf. Part No    Part Description
DR-4524  45 W / 2 A DIN rail 24 VDC power supply with universal 85...264 VAC input
DR-75-24  75 W / 3.2 A DIN rail 24 VDC power supply with universal 85...264 VAC input
DR-120-24  120 W / 5 A DIN rail 24 VDC power supply with 88...132 VAC / 176...264 VAC input by switch
Mini DB9F-to-TB  DB9 female to terminal block adapter
WK-36-02  Wall-mounting kit
Zubehör // Accessories to TOP
MXview

Moxa
MXview - Real-time browser-based Network Management Software Industrial Network Management Software designed for converged Automation Networks
Moxa’s MXview network management software is designed for configuring, monitoring, and diagnosing networking devices in industrial networks. MXview provides an integrated management platform that can discover networking devices and SNMP/IP devices installed on subnets. All selected network components can be managed via a web browser from both local and remote sites— anytime and anywhere.... more
DR-4524

Moxa
DR-4524 45 W DIN-Rail 24 VDC Power Supply EOL - 45W/2A DIN-rail 24 VDC Power Supply with universal 85 to 264 VAC or 120-370 VDC Input, -10 to 50°C Operating Temperature
Product phased out. Please call systerra for replacement options.

Moxa DR-4524 high quality 45 W DIN-Rail 24 VDC Power Supply, 100% full load burn-in tested, UL/CUL listed, TÜV/CB certified, and CE marked ... more
DR-75-24

Moxa
DR-75-24 - 75 W DIN-Rail 24 VDC Power Supply EOL - 75 W DIN-Rail 24 VDC Power Supply
Product phased out. Please call systerra for replacement options.

Moxa DR-75-24 high quality 75 W DIN-Rail 24 VDC Power Supply, 100% full load burn-in tested, UL/CUL listed, TÜV/CB certified, and CE marked ... more
DR-120-24

Moxa
DR-120-24 - 120 W DIN-Rail 24 VDC Power Supply EOL - 120 W DIN-Rail 24 VDC Power Supply
Product phased out. Please call systerra for replacement options.

Moxa DR-120-24 high quality 120 W DIN-Rail 24 VDC Power Supply, 100% full load burn-in tested, UL/CUL listed, TÜV/CB certified, and CE marked ... more
Mini DB9F-to-TB

Moxa
DB9F-to-TB - Mini Female DB9 to Terminal Block Mini Female DB9 to Terminal Block
Adapter mit Sub-Min D 9-pol Buchse zu 5-pol Schraub Terminal für RS-232 ... more
Return to last Page ...