Overview
The MBS2001 Blade Server can hold up to 4 SBCs in a 2U high, 25.75” deep rugged chassis. Not only for the low MTTR (mean time to replace) but it also exceeds the contact's performance requirements while meeting all others.
Each processor blade is independent; 1200W total system power redundant
SWaP Optimized High-Performance Computing:
The right combination of compute density and hard drive options. Four separate processor boards in a 2U rackmount
system. Each processor board has a 3.5” drive bay which can be populated with two 2.5” hard drives (8 drives total).
Xeon or Core Series CPUs
Enhance system performance with single Core™ or dual Intel® Xeon® Processors.
Reduced MTTR
Replace modular blades and power supply in seconds. Customizable and flexible architecture for lower TCO.
1200W Removable PSU
Redundant wattage in a low-profile power supply that easily supports all processor boards.
Features
- I/O Front: Each modular blade supports
- 2 - USB 3.0 ports
- 1 - Power On/Off switch
- 1 - Status LED
- 2 - 10/100/1000 Ethernet Ports
- Modular Blade Types: Four independent modular blade slots, each supporting a variety of processor board options. 1U and 2U tall enclosure types are supported with a variety of I/O and interconnect options. (Contact Trenton Systems for more configuration details.)
- HDD/SDD Front Access Data Storage: 4 – Front removable and hot swap 3.5” drive bays support up to eight 2.5“ HDD/SSDs. There are two (2) front access HDD/SDDs supported per modular blade card and up to 8 maximum for the MBS2001 system.
- MBS2001 Front-Access Ethernet: An eight-port Ethernet switch is installed in the front of the MBS2001 that provides 10/100/1000 Ethenet connectivity between blades. Two front-access 10/100/1000 ports are located in the front of the chassis and may be used for all general purpose ethernet functions.
- Chassis Standard: EIA RS-310C 19” Rackmount Standard
- Power Supply: 1200W 1U, rear mounted, redundant - MTTR-Optimized Power Supply
- Construction: Cold-rolled Steel with a black front surface and easy slide-in/slide-out 1U and 2U modular blade card assemblies and redundant power supply modules.
- Dimensions
- 19.0“ (W) 3.5“ (H) x 25.75” (D)
- 48.26cm (W) 8.9cm (H) x 66.0cm (D)
The above specifications are configuration dependent.
Note 1 Extended temperature range is dependent on system configuration, components, and application thermal profile. Pls. contact systerra computer for information specific to your desired configuration requirements.
Note 2 Themis designs all products to meet or exceed listed data sheet specifications. Some specifications are configuration dependent.
Bitte beachten Sie, dass die hier und in der Produktdokumentation aufgeführten Beschreibungen keine Zusicherung von technischen Daten darstellen. Die Spezifikationen können jederzeit und ohne Ankündigung geändert werden. In Abhängigkeit von Konfiguration und Betriebsbedingungen stehen Funktionen und Ausstattungsmerkmale zum Teil nicht gleichzeitig zur Verfügung. Für die verbindliche Spezifikation von Ausstattungen und technischen Eigenschaften fordern Sie bitte daher immer ein schriftliches Angebot an.
Ordering Options
Bitte fordern Sie ein individuelles Angebot an - wir beraten Sie gerne / Please call or mail for configuration options - we will gladly advise you
|
