The DM34216HR dataModule is a rugged high speed data acquisition (DAQ) module in the PCIe/104 format which boasts four 16-bit 25 MHz A/D converters.
This module provides 4 single-ended analog input channels with software-selectable input ranges and input impedances. Each input channel has a dedicated ADC, permitting simultaneous sampling of the inputs. Additionally, each channel also has a dedicated DMA channel, which ensures the ability for the host controller or a DSP to continuously collect data from all four channels across the PCIe x4 interfaces.
The DM34216HR also features 32-bit advanced DIO with peripheral output capabilities including a quad PWM and external clocking. The SyncBus permits multiple DAQ cards to be synchronized within the system.
When used with RTD’s SPM34CP high-performance DSP, data can be transferred directly to the DSP’s memory using a CPU’s PCIe connection.
Features
- PC/104 form factor
- PCIe/104 stackable bus structure
- PCIe Type 2 expansion bus
- PCIe x4 interface (Gen 2)
- In-band interrupts and messages
- Message Signaled Interrupt (MSI) support
- Analog Inputs
- 4 high-speed inputs with simultaneous sampling
- Input sampling rate from 1–25 MSPS
- 16-bit resolution
- Single-ended inputs
- Programmable 50 ohm or high impedance input
- Programmable input full-scale ranges in bipolar mode: ±2.5V, ±1.667V, ±1.25V, ±0.833V, ±0.625V, ±0.4167V
- Only available in high impedance mode: ±5V, ±3.3V
- Programmable input full-scale ranges in unipolar mode: 0-5V, 0-3.3V, 0-2.5V, 0-1.67V, 0-1.25V, 0-0.8333V
- Sampling modes and triggers are configurable independently
- User registers permit capturing multiple variable width windows of data at different offsets
- Threshold detection can generate an interrupt, or be used as a start or stop trigger
- 4 MMCX connectors
- SyncBus
- Allows synchronization of the sampling clock on multiple boards
- Allows synchronization of start and stop triggers on multiple boards
- Software selectable Master/Slave
- Software selectable termination
- Selectable 10 Mhz Reference
- Onboard
- SyncBus Connector
- MMCX connection for External Input
- Digital I/O
- 32 pins
- Bit programmable direction
- 5 V Tolerant TTL Signaling level
- Advance Interrupt: Interrupt on Match, Change or Strobe
- Peripheral Selectable Outputs: PWM, External Clocking
- Parallel Bus Mode
- Max output current 10 mA
- Incremental Encoders
- One Incremental Encoder channels
- Single-ended or Pseudo-differential inputs
- Variable frequency input filtering
- 32-bit resolution
- FIFO with DMA channel available for position sampling
- Pulse Width Modulators
- One Quad PWM output
- Single-ended or Differential outputs
- 32-bit resolution
- FIFO with DMA channel
- External Clocking
- Provides 6 external clocks that can be configured as inputs or outputs
- Can be used as external trigger
- External gate provided for each clock input
- On-board temperature monitor
- Available in stackable, rugged enclosures
- Requires only +5 VDC for operation
Connector Interface
- Stackable Buses
PCIe expansion bus (Type 2)
- External I/O Connectors
40-pin right-angle header
- Digital I/O
5 Vertical MMCX Connectors
- 4 - Analog Inputs
- 1 - External reference
16-pin header (right-angle)
- SyncBus
Available in stackable, rugged IDAN enclosures
Ordering Options
Manuf. Part No | | Part Description |
DM34216HR | | PCIe/104 1–25 MHz A/D Converter |
IDAN-DM34216HR | | PCIe/104 1–25 MHz A/D Converter in modular IDAN frame |
|