Moxa's CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40...+85°C wide operating temperature (CP-602U-I-T only) and 2 KV isolation make the boards suitable for use in harsh industrial environments.
Features
- CAN 2.0A and CAN 2.0B supported
- Two independent CAN communication ports
- CAN transfer rate up to 1 Mbps
- 2 KV optical isolation protection
- LED for transmit/receive status on each port
- Optional 120 ohm terminal resistor for CAN bus network
- DLL library and examples included
- Windows driver provided
- Standards and Certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class B
- 5 Years Warranty
Ordering Options
Manuf. Part No | | Part Description | |
CP-602U-I w/o Cable | | 2-port CAN interface Universal PCI board, with 2 KV isolation protection, 0...+55°C operating temperature |
|
CP-602U-I-T w/o Cable | | 2-port CAN interface Universal PCI board with 2 KV optical isolation protection, -40...+85°C operating temperature |
|
Accessories
Manuf. Part No | | Part Description | |
CBL-F9M9-150 | | DB9-F to DB9-M serial cable, 150 cm |
|
CBL-F9M9-20 | | DB9-F to DB9-M serial cable, 20 cm |
|
Mini DB9F-to-TB | | DB9 female to terminal block connector |
|
|