CCE-PUNK

I/O Companion Board for EKF CALPSO/RUMBA CompactPCI SBC

Available as a mezzanine companion board to the CCD-CALYPSO and CCG-RUMBA CPU card, the CCEPUNK is provided with high-speed communication channels such as FireWire and USB, and common legacy I/O ports as well. Interconnection between the CCE-PUNK I/O module and the CPU carrier board is achieved by several expansion connectors, which comprise the PCIe (PCI Express), LPC (Low Pin Count) and ATA/IDE interfaces.

As an option, the CCE-PUNK is available with a rugged on-board 2.5-inch hard disk drive (1.8-inch as a mezzanine module). The CCE-PUNK will be attached on top of the CPU board, and shares its front panel typically with the host CPU carrier board (8HP front panel width in total).

In addition to its front panel I/O connectors, the CCE-PUNK has been designed also for rear I/O and therefore requires a non-bussed single-slot P1/P2 backplane in addition to the CompactPCI bus. However, if front panel I/O is solely needed, the J1/J2 connectors may be omitted as an option.

+49(0)611 44889 400

info@systerra.de

Vetriebsbüros

Return to last Page ...