RTD offers the CAN2541xHR and CAN3541xHR with 2 or 4 CAN bus channels to permit integration of up to four galvanically isolated CAN bus channels into rugged PCIe/104 and PCI/104-Express systems and enclosures. This is accomplished using PEAK-System's PCAN-miniPCIe CAN bus Mini PCI Express modules (also known as PCIe Mini Cards, or PCI Express Mini Cards).
For each module connection on the CAN2541xHR and CAN3541xHR, a pair of 2mm 10-pin vertical headers are available per socket, permitting wiring of each CAN bus channel on the Mini PCI Express module to dedicated 2mm headers onboard. This permits easy access via a corresponding set of 0.1" 10-pin right-angle headers on the board edge.
Features
- PC/104 form factor
- Bus Structure Options:
PCIe/104 (CAN3541xHR)
• PCIe universal expansion bus
• (PCIe/104 Type 1 and Type 2 compatibility)
PCI/104-Express (CAN2541xHR)
• PCIe universal expansion bus
• (PCIe/104 Type 1 & Type 2 compatibility)
• PCI pass-through expansion bus
- PEAK-System "PCAN-miniPCIe" Mini PCI Express Card
• Dual Channel CAN Bus interfaces
• Bit rates from 5 kbit/s up to 1 Mbit/s
• High-Speed CAN Compliance
- 2.0A (11-bit ID, Standard Format)
- 2.0B (29-bit ID, Extended Format)
• SJA1000 compatible
• Provides differential transmit capability to the bus in accordance with the ISO 11898 Standard
• Galvanic isolation on the CAN connection up to 300 V, separate for each connection
• Operating Temp range: -40 to +85ºC
- Jumper-enabled CAN bus termination for each channel
- Requires one PCIe x1 link
• PCIe link repopulation allowing increased PCI Express stack capacity
- Dual Mini PCI Express Card Sockets
• Each socket supports three modes of operation
- Single x1 PCIe link (Gen 2, 5 GT/s) and single USB 2.0 link
- Single x1 PCIe link (Gen 2, 5 GT/s)
- Single USB 2.0 link
• Mounting holes permit installation of Full-Mini and Half-Mini sized Mini PCI Express modules
• LED connector provide external access to the LED signals on both Mini PCI Express sockets
- Selected Mini PCIe cards may affect standard operating temperature
- Available in stackable, rugged enclosures
- Requires only +5 VDC for operation
Also available in a stackable, rugged IDAN enclosure: IDAN-CAN2541xHR IDAN-CAN3541xHR
Ordering Options
Manuf. Part No | | Part Description |
CAN35412HR | | PCIe/104 with 1 module installed, 2 CAN bus channels |
CAN35414HR | | PCIe/104 with 2 module installed, 4 CAN bus channels |
CAN25412HR | | PCI/104-Express with 1 module installed, 2 CAN bus channels |
CAN25414HR | | PCI/104-Express with 2 module installed, 4 CAN bus channels |
Accessories
Manuf. Part No | | Part Description |
XK-CM30 | | 10-pin 0.1" DIL to 9-pin D-Sub male (set of four) |
|