The ATX104plusHR is a 88 Watt high power DC/DC converter for PC/104+ systems. The supply provides +5 V, +3.3 V, +12 V, -12 V, and -5 V to the PC/104 bus and to the PC/104-Plus bus. Additionally, +5 V, +3.3 V, +12 V, and -12 V are provided at auxiliary connectors on the supply. The ATX104plusHR provides the additional ATX signals PS_ON#, PWR_ON and +5 VSB on the PCI bus using the reserved pins.
The design uses a +5 V dual phase supply cascaded to a +12 V and a -12 V circuit. The -5 V is cascaded from the -12V circuit. The +5V is designed for 50 Watts, the +1 2V is designed for 24 Watts, and the -12V is designed for 6 Watts.
The ATX104plusHR was designed to work without a heatsink and is easily integrated into IDAN systems using conduction cooling.
Features
- PC/104 Form Factor
- PC/104-Plus Stackable Bus Structure
- High Power Capacity
• 88 W maximum output power
• Operational from -40..+85°C
• All supplies are synchronized to reduce noise and system stress
• Efficiency as high as 90%
- Wide Input Voltage Range
• 8..32 Vdc Unregulated DC input (36 V absolute maximum)
• Low input capacitance
• Low input current ripple
• Reverse Polarity Protection to 40 Volts
• Input Voltage Transient Protection
- Outputs
• +5 Vdc Standby at 1.0 A
• +5 Vdc at 10.0 A
• +3.3 Vdc at 10.0 A
• +12 Vdc at 2.0 A
• -12 Vdc at 500 mA
• -5 Vdc at 100 mA on PC/104 bus
- Status LEDs
• Placed conveniently next to the ISA Bus for easy viewing
- Remote ON/OFF operation available
Also available in a stackable, rugged IDAN enclosure: IDAN-ATX104plusHR
Ordering Options
Manuf. Part No | | Part Description |
ATX104plusHR | | 88 Watt Embedded PC/104-Plus Power Supply with ATX control |
Accessories
Manuf. Part No | | Part Description |
AC/DC PS | | External AC/DC Power Supply |
|